CAMERON · MOORE COUNTY · NC

Excavation, Grading & Restoration in Cameron, NC

Excavation, Grading & Restoration in Cameron and across Moore County, with a free site visit, a fixed quote and one crew from start to finish.

Service areaCameron & Moore County
PopulationAbout 262 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free excavation, grading & restoration quote in Cameron

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Excavation, Grading & Restoration in Cameron

Cameron grew about 8.7% between 2020 and 2024, faster than North Carolina as a whole.

Everything the service includes is set out on our main excavation, grading & restoration page; this page covers what is specific to Cameron.

Available here: Fire & Water Restoration, Environmental Remediation, Excavation, Land Grading and Furniture Removal.

QUICK ANSWERS

Excavation & Grading permit
Needed for an acre or more; we check and file
Best months
October and November
County
Moore County
Nearest large city
Fayetteville, about 23 miles
Typical home built
1955 (74% before 1980)

Excavation, Grading & Restoration and the Cameron housing stock

New construction is a modest part of Cameron: 2% of homes date from 2010 or later, so excavation, grading & restoration demand follows redevelopment of existing lots (American Community Survey).

84% of occupied Cameron homes are owner-occupied, above the state’s 66%, so most excavation, grading & restoration customers here are homeowners deciding for themselves.

Cameron’s growth and demand for excavation, grading & restoration

Cameron had 241 residents at the 2020 baseline, and the U.S. Census Bureau estimates 262 by July 2024, growth of 8.7%, ahead of the statewide 5.8%.

In a growing town like Cameron, most excavation, grading & restoration calls come from new homes and developments that need land cleared, dug and graded.

Cameron ground conditions and excavation, grading & restoration

Across Cameron, the most common soil in the USDA soil survey is the Georgeville series (4 of nine sample points). It is well drained and moderately fast-draining (hydrologic group B), on mapped slopes of 0–15%. Bedrock can sit as shallow as about 5 feet.

Digs below about 5 feet in Cameron can hit rock, so deep footings, basements and trenches may need a hydraulic breaker. Mapped slopes reach 15% in parts of Cameron, so machine access and erosion control are planned around the grade.

Where we provide excavation, grading & restoration near Cameron

About 23 miles from Fayetteville, Cameron is part of our Moore County service area for excavation, grading & restoration.

Cameron dates back to 1875, sits about 358 feet above sea level (Cameron on Wikipedia).

Local permit offices, fee schedules and notices are published on the Moore County website.

Other Moore County communities we serve for excavation, grading & restoration: Foxfire, Jackson Springs, Pinehurst, Taylortown, Aberdeen and Seven Lakes.

We also provide excavation, grading & restoration in Vass, Whispering Pines, Carthage and Southern Pines.

Landmarks around Cameron and excavation, grading & restoration

  • Cameron Historic District (about 1 mi from Cameron). Around Cameron Historic District, older buildings carry historic value, so we check local district rules before excavation, grading & restoration begins.
  • John Evander Phillips House (about 1 mi from Cameron). John Evander Phillips House is a familiar Cameron reference point; homes and businesses around it are part of our excavation, grading & restoration area.

Permitted disposal sites for excavation, grading & restoration near Cameron

Loads of stumps, brush, soil and clean concrete that can’t be recycled can go to an LCID (land-clearing and inert debris) landfill; the closest on the NC DEQ Solid Waste Section permitted list is Weeks Sandpit #2 LCID in Cameron, about 8 miles from Cameron. Mixed demolition debris from Cameron can go to Moore County C&D Landfill in Aberdeen, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 18 miles off.

Excavation, Grading & Restoration permits and regulations in Cameron

Land disturbance in Cameron of one acre or more needs an approved plan under the NC DEQ erosion and sediment control program, and the Town of Cameron or the Moore County inspections office may require a grading permit. When a permit is needed, we file it with the Town of Cameron or Moore County’s inspections office, whichever covers your address.

For excavation, grading & restoration in Cameron, the rules come from NC 811, NC DEQ: Erosion and sediment control, NC DEQ: Brownfields Program and EPA: Mold.

Cameron weather and excavation, grading & restoration scheduling

At about 358 feet above sea level, Cameron has Piedmont weather: steamy summers, pop-up storms and occasional winter ice. October and November is usually the best window for excavation, grading & restoration here, with cooler days, firmer ground and fewer thunderstorms; July and August are the hardest months.

Cameron excavation, grading & restoration pricing factors

What is specific to pricing excavation, grading & restoration in Cameron:

  • What the property is worth. Cameron homes have a median value of about $135,000; that context shapes how much a excavation, grading & restoration project makes sense.

Excavation, Grading & Restoration near Cameron: map

Get a free excavation, grading & restoration quote in Cameron

CAMERON · MOORE COUNTY

Need excavation, grading & restoration in Cameron?

One call or message gets a free Cameron site visit and a price with every line spelled out.

LIVE · NATIONAL WEATHER SERVICE

Excavation, Grading & Restoration weather outlook for Cameron this week

How the next seven days in Cameron, Moore County affect excavation, grading & restoration, from the official National Weather Service forecast.

Loading the latest forecast for Cameron…

READY TO CLEAR THE SITE?

Tell us about your excavation, grading & restoration project in Cameron.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Excavation, Grading & Restoration in Cameron: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
What permits does excavation, grading & restoration need in Cameron?

Land disturbance in Cameron of one acre or more needs an approved plan under the NC DEQ erosion and sediment control program, and the Town of Cameron or the Moore County inspections office may require a grading permit.

Where does the debris from Cameron jobs go?

Loads of stumps, brush, soil and clean concrete that can’t be recycled can go to an LCID (land-clearing and inert debris) landfill; the closest on the NC DEQ Solid Waste Section permitted list is Weeks Sandpit #2 LCID in Cameron, about 8 miles from Cameron. Mixed demolition debris from Cameron can go to Moore County C&D Landfill in Aberdeen, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 18 miles off.

When is the best time of year for excavation, grading & restoration in Cameron?

Usually October and November, with cooler days, firmer ground and fewer thunderstorms. July and August are the hardest in Cameron, with humid afternoons and downpours that stall grading.

Where can I check Cameron permit rules myself?

The Moore County website publishes local ordinances and permit contacts.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp