Excavation, Grading & Restoration in White Plains
Winston-Salem is 32 miles from White Plains, and we cover both.
Our excavation, grading & restoration page explains the work in general; below is what changes in White Plains.
Services in this group available in White Plains: Fire & Water Restoration, Environmental Remediation, Excavation, Land Grading and Furniture Removal.
QUICK ANSWERS
- Excavation & Grading permit
- Needed for an acre or more; we check and file
- Best months
- October and November
- County
- Surry County
- Nearest large city
- Winston-Salem, about 32 miles
- Typical home built
- 1971 (62% before 1980)
Excavation, Grading & Restoration and the White Plains housing stock
At $234,000, White Plains’ median home value tops the Surry County figure of $166,000; that supports excavation, grading & restoration for rebuilds (American Community Survey).
75% of occupied White Plains homes are owner-occupied, above the state’s 66%, so most excavation, grading & restoration customers here are homeowners deciding for themselves.
Who needs excavation, grading & restoration in White Plains
With no town government, White Plains (about 770 residents) falls under Surry County for permits and ordinances.
In White Plains, excavation, grading & restoration is usually about new homes and developments that need land cleared, dug and graded.
White Plains ground conditions and excavation, grading & restoration
Across White Plains, the most common soil in the USDA soil survey is the Fairview series (5 of nine sample points). It is well drained and moderately fast-draining (hydrologic group B), on mapped slopes of 2–25%. Bedrock can sit as shallow as about 2 feet.
Where rock is within 2 feet, deep excavation, grading & restoration work in White Plains may need breaking or ripping, which we check at the site visit. With slopes up to 25% in places, White Plains jobs on the grade use smaller machines and stabilize soil quickly.
Excavation, Grading & Restoration around White Plains and Surry County
About 32 miles from Winston-Salem, White Plains is part of our Surry County service area for excavation, grading & restoration.
At roughly 1,119 feet of elevation, White Plains has its own character; see White Plains on Wikipedia.
Local permit offices, fee schedules and notices are published on the Surry County website.
Other Surry County communities we serve for excavation, grading & restoration: Pilot Mountain, Lowgap and Elkin.
Close to White Plains, the same excavation, grading & restoration service covers Toast, Mount Airy, Dobson and Flat Rock.
Landmarks around White Plains and excavation, grading & restoration
- Bull Creek (about 2 mi from White Plains). Sites that drain toward Bull Creek need silt fence and inlet protection so soil stays out of the water during excavation, grading & restoration.
- Beech Creek (about 2 mi from White Plains). Properties in the neighborhoods around Beech Creek are covered by our White Plains excavation, grading & restoration service, with access and parking checked at the site visit.
Permitted disposal sites for excavation, grading & restoration near White Plains
For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Surry County LCID Facility in Mount Airy (Surry County), roughly 4 miles from White Plains, per the NC DEQ Solid Waste Section. Mixed demolition debris from White Plains can go to Abbey Green Transfer Station in Winston-Salem, the nearest active C&D transfer station permitted by the NC DEQ Solid Waste Section, about 37 miles off.
White Plains rules that apply to excavation, grading & restoration
In White Plains, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the Surry County inspections office may also want a grading permit. Unincorporated White Plains is usually permitted by Surry County; we check for any town jurisdiction first, then file.
For excavation, grading & restoration in White Plains, the rules come from NC 811, NC DEQ: Erosion and sediment control, NC DEQ: Brownfields Program and EPA: Mold.
White Plains weather and excavation, grading & restoration scheduling
At about 1,119 feet above sea level, White Plains gets hot, humid summers with afternoon thunderstorms and short, mild winters broken by the odd ice storm. For excavation, grading & restoration in White Plains, aim for October and November: mild weather and dry clay that holds equipment. Avoid July and August if you can, given humid afternoons and downpours that stall grading.
White Plains excavation, grading & restoration pricing factors
What is specific to pricing excavation, grading & restoration in White Plains:
- What the property is worth. White Plains homes have a median value of about $234,000; that context shapes how much a excavation, grading & restoration project makes sense.
- Haul distance. With roughly 37 miles to the closest permitted site, fuller, fewer loads keep White Plains haul costs down.
Excavation, Grading & Restoration near White Plains: map
Get a free excavation, grading & restoration quote in White Plains
WHITE PLAINS · SURRY COUNTY
Need excavation, grading & restoration in White Plains?
Get a fixed excavation, grading & restoration price for your White Plains property after a free visit.