Excavation in Siler City
Burlington is 24 miles from Siler City, and we cover both.
For the full scope of the service, see our excavation page. Here we focus on Siler City: its housing, rules, ground and weather.
QUICK ANSWERS
- Excavation permit
- Needed for an acre or more; we check and file
- Best months
- October and November
- New homes permitted, 2024
- 17
- Population
- About 8,087 (2024 est.)
- Region
- Piedmont
Excavation and the Siler City housing stock
New construction is a modest part of Siler City: 4% of homes date from 2010 or later, so excavation demand follows redevelopment of existing lots.
The typical home in Siler City was built around 1981, older than the Chatham County median of 1997, according to American Community Survey estimates. 49% predate 1980, 6% before 1940, so older lots in Siler City were often graded to looser standards, so drainage fixes are common when sites are reworked.
Siler City at a glance for excavation
U.S. Census Bureau figures show Siler City going from 7,713 residents (2020) to 8,087 (2024), steady growth of 4.8%.
The Census Bureau building permits survey counts 17 new single-family homes authorized in Siler City in 2024. Building is slow in Siler City, so most excavation here is on existing properties rather than new developments.
Siler City ground conditions and excavation
Across Siler City, the most common soil in the USDA soil survey is the Georgeville series (6 of nine sample points). It is well drained and moderately fast-draining (hydrologic group B), on mapped slopes of 0–10%. Bedrock can sit as shallow as about 2 feet, the seasonal water table can rise to about 1 foot below the surface and the survey rates the ground “not limited” for homes with basements.
Digs below about 2 feet in Siler City can hit rock, so deep footings, basements and trenches may need a hydraulic breaker. With groundwater as close as 1 foot, open holes in Siler City can take on water, so pumping is planned for wet months and fill goes in compacted layers.
Former industrial land and excavation in Siler City
4 properties in and around Siler City are enrolled in the NC Brownfields Program, among them Gary L. and Sarah S. Smith Properties, Townsend and Acme-McCrary and McLaurin.
Redeveloping a brownfield follows a Brownfields Agreement with NC DEQ, which can limit how soil is disturbed and how the land is used, so excavation on these sites is planned around the agreement’s land-use restrictions.
Siler City and nearby towns for excavation
Siler City is a Chatham County community in North Carolina’s Piedmont, about 24 miles from Burlington.
According to Siler City on Wikipedia, Siler City is a long-standing community and stands about 623 feet up.
Local permit offices, fee schedules and notices are published on the Town of Siler City website and the Chatham County website.
Elsewhere in Chatham County, our excavation pages cover Governors Village, Carolina Meadows, Goldston, Gulf, Pittsboro and Briar Chapel.
Neighbors of Siler City we serve: Staley, Liberty, Ramseur and Bennett.
Siler City places that shape our excavation work
- Cadmus N. Bray House. The streets near Cadmus N. Bray House are part of our Siler City service area for excavation.
- Former High Point Bending and Chair Company. Former industrial buildings like Former High Point Bending and Chair Company show how older brick, timber and steel can be salvaged and reused instead of landfilled, an option we offer on excavation jobs.
Siler City landfills and transfer stations for excavation
Loads of stumps, brush, soil and clean concrete that can’t be recycled can go to an LCID (land-clearing and inert debris) landfill; the closest on the NC DEQ Solid Waste Section permitted list is Chatham County LCID Landfill in Pittsboro, about 12 miles from Siler City. For Siler City, the closest permitted construction and demolition landfill is Tri-Corners C&D Landfill in Liberty (Alamance County), roughly 16 miles away, per the NC DEQ Solid Waste Section.
Permits and rules for excavation in Siler City
Land disturbance in Siler City of one acre or more needs an approved plan under the NC DEQ erosion and sediment control program, and the Town of Siler City or the Chatham County inspections office may require a grading permit. When a permit is needed, we file it with the Town of Siler City or Chatham County’s inspections office, whichever covers your address.
For excavation in Siler City, the rules come from OSHA: Trenching and excavation, NC DEQ: Erosion and sediment control, EPA: Construction stormwater and OSHA: Heat exposure.
Siler City weather and excavation scheduling
Sitting near 623 feet, Siler City gets hot, humid summers with afternoon thunderstorms and short, mild winters broken by the odd ice storm. Most Siler City customers book excavation for October and November. July and August bring humid afternoons and downpours that stall grading.
When Hurricane Fran reached the Triangle in 1996, its winds brought trees down onto homes across the region, a reminder for property owners across Chatham County of how storms create demolition and clean-up work.
Pricing excavation in Siler City
On top of the usual factors, a Siler City quote reflects:
- What the property is worth. Siler City homes have a median value of about $155,000; that context shapes how much a excavation project makes sense.
Excavation near Siler City: map
Get a free excavation quote in Siler City
SILER CITY · CHATHAM COUNTY
Need excavation in Siler City?
Send your Siler City address for a free site visit and a fixed, itemized quote.