BARKER TEN MILE · ROBESON COUNTY · NC

Industrial Demolition in Barker Ten Mile, NC

Local industrial demolition for Barker Ten Mile: we visit, quote a fixed price and handle the work end to end.

Service areaBarker Ten Mile & Robeson County
PopulationAbout 770
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free industrial demolition quote in Barker Ten Mile

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

About our industrial demolition work in Barker Ten Mile

Fayetteville is 28 miles from Barker Ten Mile, and we cover both.

Our industrial demolition page explains the work in general; below is what changes in Barker Ten Mile.

QUICK ANSWERS

Industrial Demolition permit
Required; we file it with the county
Best months
November through April
New homes permitted, 2024
290 (county)
Population
About 770
Region
Coastal Plain

What Barker Ten Mile’s homes tell us about industrial demolition

Barker Ten Mile’s homes are 81% detached houses, 19% mobile homes. In a town of single-family lots like Barker Ten Mile, industrial demolition usually happens with a driveway and yard to protect.

1977 is the median build year in Barker Ten Mile, older than the Robeson County median of 1985, per the American Community Survey, and 58% of homes predate 1980: older structures around Barker Ten Mile are more likely to contain hazardous materials that must come out before demolition.

Who needs industrial demolition in Barker Ten Mile

With no town government, Barker Ten Mile (about 770 residents) falls under Robeson County for permits and ordinances.

In Barker Ten Mile, industrial demolition is usually about redevelopment of older industrial, civil and specialty structures.

What Barker Ten Mile’s soil means for industrial demolition

The USDA soil survey maps Lynchburg soils at 3 of nine points we checked across Barker Ten Mile. They are poorly drained and moderately fast-draining (hydrologic group B/D, when drained), on mapped slopes of 0–2%. The seasonal water table can rise to about 1 foot below the surface and the survey rates the ground “very limited” for homes with basements.

For owners planning to rebuild with a basement, the “very limited” rating means drainage deserves attention from the start. A water table near 1 foot means industrial demolition in Barker Ten Mile is easiest in dry weather, with dewatering ready for a wet spell.

Industrial Demolition around Barker Ten Mile and Robeson County

About 28 miles from Fayetteville, Barker Ten Mile is part of our Robeson County service area for industrial demolition.

At roughly 135 feet of elevation, Barker Ten Mile has its own character; see Barker Ten Mile on Wikipedia.

Barker Ten Mile residents can find ordinances and permit contacts on the Robeson County website.

Close to Barker Ten Mile, the same industrial demolition service covers Lumberton, St. Pauls, Rennert and Butters.

Industrial Demolition near Barker Ten Mile landmarks

  • Robeson Community College (about 1 mi from Barker Ten Mile). Busy destinations like Robeson Community College bring traffic, so we plan hauling routes and times for industrial demolition to stay out of the way.

Where debris from industrial demolition in Barker Ten Mile goes

The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Robeson County CDLF in Saint Pauls, about 9 miles from Barker Ten Mile. Clean concrete, brick and stumps have a closer option at Autry Grading, Inc., LCID Landfill in Hope Mills, an LCID landfill about 21 miles away.

Barker Ten Mile rules that apply to industrial demolition

Specialty work in Barker Ten Mile starts with a permit from the Robeson County inspections office, plus any engineering or agency approvals the method needs. Unincorporated Barker Ten Mile is usually permitted by Robeson County; we check for any town jurisdiction first, then file. Asbestos rules for Barker Ten Mile are set by the state Health Hazards Control Unit. The state asks for demolition notices at least 10 working days before work starts and strongly recommends an asbestos inspection for every building, including single-family homes.

We follow the requirements of NC DEQ: Brownfields Program, EPA: Polychlorinated biphenyls (PCBs), EPA: Brownfields and OSHA: Demolition safety on every Barker Ten Mile job. Flood maps for Barker Ten Mile are on the NC Flood Risk Information System.

When to book industrial demolition in Barker Ten Mile

At about 135 feet above sea level, Barker Ten Mile is in hurricane country, with storm season running June to November and a water table close to the surface. Most Barker Ten Mile customers book industrial demolition for November through April. August and September bring peak hurricane season, heavy heat and saturated ground that stop work.

For Barker Ten Mile, the regional storm record includes this: after Hurricane Florence’s record flooding in September 2018, flood-damaged homes across the southeast had to be removed.

Pricing industrial demolition in Barker Ten Mile

What is specific to pricing industrial demolition in Barker Ten Mile:

  • Coastal permitting. Robeson County coastal and flood rules can add paperwork.

Industrial Demolition near Barker Ten Mile: map

Get a free industrial demolition quote in Barker Ten Mile

BARKER TEN MILE · ROBESON COUNTY

Need industrial demolition in Barker Ten Mile?

Get a fixed industrial demolition price for your Barker Ten Mile property after a free visit.

LIVE · NATIONAL WEATHER SERVICE

Industrial Demolition weather outlook for Barker Ten Mile this week

How the next seven days in Barker Ten Mile, Robeson County affect industrial demolition, from the official National Weather Service forecast.

Loading the latest forecast for Barker Ten Mile…

READY TO CLEAR THE SITE?

Tell us about your industrial demolition project in Barker Ten Mile.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Industrial Demolition in Barker Ten Mile: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Do I need a permit for industrial demolition in Barker Ten Mile?

Specialty work in Barker Ten Mile starts with a permit from the Robeson County inspections office, plus any engineering or agency approvals the method needs.

Where can I check Barker Ten Mile permit rules myself?

The Robeson County website publishes local ordinances and permit contacts.

Where does the debris from Barker Ten Mile jobs go?

The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Robeson County CDLF in Saint Pauls, about 9 miles from Barker Ten Mile. Clean concrete, brick and stumps have a closer option at Autry Grading, Inc., LCID Landfill in Hope Mills, an LCID landfill about 21 miles away.

What is the soil like in Barker Ten Mile?

The USDA soil survey shows mostly Lynchburg soils, poorly drained and a seasonal water table that can rise to about 1 foot.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp