Bent Creek industrial demolition, start to finish
Asheville is 5 miles from Bent Creek, and we cover both.
Our industrial demolition page explains the work in general; below is what changes in Bent Creek.
QUICK ANSWERS
- Industrial Demolition permit
- Required; we file it with the county
- Best months
- Late spring and early fall
- New homes permitted, 2024
- 2,765 (county)
- Population
- About 1,550
- Region
- Mountains
What Bent Creek’s homes tell us about industrial demolition
Housing in Bent Creek breaks down as 78% detached houses, 8% apartments and condos, 14% mobile homes. In a town of single-family lots like Bent Creek, industrial demolition usually happens with a driveway and yard to protect.
1977 is the median build year in Bent Creek, older than the Buncombe County median of 1989, per the American Community Survey, and 53% of homes predate 1980: the age of Bent Creek’s older buildings makes surveys for asbestos, lead and PCBs routine.
Who needs industrial demolition in Bent Creek
Bent Creek is an unincorporated community of about 1,550 people in Buncombe County, so county rules generally apply rather than a town’s.
Most industrial demolition requests here come from redevelopment of older industrial, civil and specialty structures.
What Bent Creek’s soil means for industrial demolition
The USDA soil survey maps Clifton soils at 4 of nine points we checked across Bent Creek. They are well drained and moderately fast-draining (hydrologic group B), on mapped slopes of 8–95%. Bedrock can sit as shallow as about 2 feet and the survey rates the ground “very limited” for homes with basements.
Where rock is within 2 feet, deep industrial demolition work in Bent Creek may need breaking or ripping, which we check at the site visit. For owners planning to rebuild with a basement, the “very limited” rating means drainage deserves attention from the start.
Brownfield sites and industrial demolition in Bent Creek
The NC Brownfields Program lists 1 site in the Bent Creek area, including Ticar Chemical, Former.
A Brownfields Agreement with NC DEQ can restrict digging, soil handling and future use; on these Bent Creek sites, industrial demolition starts with those restrictions.
Industrial Demolition around Bent Creek and Buncombe County
About 5 miles from Asheville, Bent Creek is part of our Buncombe County service area for industrial demolition.
At roughly 2,208 feet of elevation, Bent Creek has its own character; see Bent Creek on Wikipedia.
Check the Buncombe County website for Bent Creek’s current fees and permit desks.
Other Buncombe County communities we serve for industrial demolition: Woodfin, Swannanoa and Black Mountain.
Close to Bent Creek, the same industrial demolition service covers Avery Creek, Biltmore Forest, Asheville and Emma.
Industrial Demolition near Bent Creek landmarks
- North Carolina Arboretum (about 1 mi from Bent Creek). Sites that drain toward North Carolina Arboretum need silt fence and inlet protection so soil stays out of the water during industrial demolition.
- Bent Creek Campus of the Appalachian Forest Experiment Station (about 1 mi from Bent Creek). Around Bent Creek Campus of the Appalachian Forest Experiment Station, older buildings carry historic value, so we check local district rules before industrial demolition begins.
Where debris from industrial demolition in Bent Creek goes
The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Buncombe County C&D Unit in Alexander, about 15 miles from Bent Creek.
Bent Creek rules that apply to industrial demolition
Specialty work in Bent Creek starts with a permit from the Buncombe County inspections office, plus any engineering or agency approvals the method needs. Unincorporated Bent Creek is usually permitted by Buncombe County; we check for any town jurisdiction first, then file. Buncombe County runs its own asbestos program through the Asheville-Buncombe Air Quality Agency. Buncombe County requires an air quality permit for any demolition, regardless of the building’s age.
NC DEQ: Brownfields Program, EPA: Polychlorinated biphenyls (PCBs), EPA: Brownfields and OSHA: Demolition safety set the standards we work to in Bent Creek. Flood maps for Bent Creek are on the NC Flood Risk Information System.
When to book industrial demolition in Bent Creek
At about 2,208 feet above sea level, Bent Creek gets real winters, with snow and ice on higher ground, and hard rain on slopes can bring flash floods. For industrial demolition in Bent Creek, aim for late spring and early fall: stable weather between the spring thaw and the first frost. Avoid December through February if you can, given icy grades and frozen soil that keep machines off slopes.
For Bent Creek, the regional storm record includes this: western North Carolina is still clearing homes damaged when Hurricane Helene brought record flooding and landslides in September 2024.
Map of our Bent Creek industrial demolition area
Book industrial demolition in Bent Creek
BENT CREEK · BUNCOMBE COUNTY
Need industrial demolition in Bent Creek?
Get a fixed industrial demolition price for your Bent Creek property after a free visit.