Industrial Demolition services in James City, NC
James City is about 31 miles from Jacksonville, and our crews work across the area.
Our industrial demolition page explains the work in general; below is what changes in James City.
QUICK ANSWERS
- Industrial Demolition permit
- Required; we file it with the county
- Main soil
- Leaf (poorly drained)
- Population
- About 5,200
- Region
- Coastal Plain
- Owner-occupied homes
- 82%
What James City’s homes tell us about industrial demolition
In James City, the housing stock is 78% detached houses, 17% mobile homes. In a town of single-family lots like James City, industrial demolition usually happens with a driveway and yard to protect.
1989 is the median build year in James City, close to the Craven County median of 1990, per the American Community Survey, and 29% of homes predate 1980: around James City, specialty demolition targets older non-residential sites.
Who needs industrial demolition in James City
James City is an unincorporated community of about 5,200 people in Craven County, so county rules generally apply rather than a town’s.
In James City, industrial demolition is usually about redevelopment of older industrial, civil and specialty structures.
What James City’s soil means for industrial demolition
The USDA soil survey maps Leaf soils at 3 of nine points we checked across James City. They are poorly drained and very slow to absorb rain, so water runs off (hydrologic group D), on mapped slopes of 0–2%. The seasonal water table can rise to about 1 foot below the surface and the survey rates the ground “very limited” for homes with basements.
For owners planning to rebuild with a basement, the “very limited” rating means drainage deserves attention from the start. Because James City’s soil absorbs rain slowly, bare ground after industrial demolition is graded to drain and stabilized quickly.
Brownfield sites and industrial demolition in James City
The NC Brownfields Program lists 1 site in the James City area, including Campbell-Everhart Site.
A Brownfields Agreement with NC DEQ can restrict digging, soil handling and future use; on these James City sites, industrial demolition starts with those restrictions.
Industrial Demolition around James City and Craven County
About 31 miles from Jacksonville, James City is part of our Craven County service area for industrial demolition.
At roughly 13 feet of elevation, James City has its own character; see James City on Wikipedia.
For local ordinances and permit contacts, see the Craven County website.
Close to James City, the same industrial demolition service covers Fairfield Harbour, Brices Creek, New Bern and Bridgeton.
Industrial Demolition near James City landmarks
- Mount Shiloh Missionary Baptist Church (about 3 mi from James City). The streets near Mount Shiloh Missionary Baptist Church are part of our James City service area for industrial demolition.
- Coastal Carolina Regional Airport (about 3 mi from James City). Busy destinations like Coastal Carolina Regional Airport bring traffic, so we plan hauling routes and times for industrial demolition to stay out of the way.
Where debris from industrial demolition in James City goes
For James City, the closest permitted construction and demolition landfill is The Maysville Construction and Demolition Landfill (Jones County), roughly 16 miles away, per the NC DEQ Solid Waste Section. Inert debris such as concrete and brick can also go to Cherry Point LCID, a permitted LCID landfill roughly 10 miles from James City.
James City rules that apply to industrial demolition
Specialty work in James City starts with a permit from the Craven County inspections office, plus any engineering or agency approvals the method needs. Unincorporated James City is usually permitted by Craven County; we check for any town jurisdiction first, then file. Asbestos rules for James City are set by the state Health Hazards Control Unit. The state asks for demolition notices at least 10 working days before work starts and strongly recommends an asbestos inspection for every building, including single-family homes.
Agencies whose rules apply to this work in Craven County: NC DEQ: Brownfields Program, EPA: Polychlorinated biphenyls (PCBs), EPA: Brownfields and OSHA: Demolition safety. Craven County is one of North Carolina's coastal counties, so work near water in James City may need a permit from the NC Division of Coastal Management. Flood maps for James City are on the NC Flood Risk Information System.
When to book industrial demolition in James City
At about 13 feet above sea level, James City is in hurricane country, with storm season running June to November and a water table close to the surface. For industrial demolition in James City, aim for November through April: milder weather and firmer ground once the storm season eases. Avoid August and September if you can, given storm threats and waterlogged lots that push jobs back.
For James City, the regional storm record includes this: record rain from Hurricane Florence in 2018 flooded much of southeastern North Carolina, and many homes were demolished in the recovery.
Pricing industrial demolition in James City
What is specific to pricing industrial demolition in James City:
- Floodplain steps. Craven County coastal and flood rules can add paperwork.
Map of our James City industrial demolition area
Book industrial demolition in James City
JAMES CITY · CRAVEN COUNTY
Need industrial demolition in James City?
Get a fixed industrial demolition price for your James City property after a free visit.