Plain View industrial demolition, start to finish
Plain View is about 26 miles from Fayetteville, and our crews work across the area.
Our industrial demolition page explains the work in general; below is what changes in Plain View.
QUICK ANSWERS
- Industrial Demolition permit
- Required; we file it with the county
- Main soil
- Wagram (well drained)
- Population
- About 1,500
- Region
- Coastal Plain
- Owner-occupied homes
- 83%
What Plain View’s homes tell us about industrial demolition
Housing in Plain View breaks down as 75% detached houses, 23% mobile homes. Mobile homes are far more common here than the 11% statewide, so pads, tie-downs and skirting come up constantly in industrial demolition (American Community Survey).
With 83% owner-occupancy against 66% statewide, industrial demolition in Plain View is mostly arranged directly with owners.
Who needs industrial demolition in Plain View
With no town government, Plain View (about 1,500 residents) falls under Sampson County for permits and ordinances.
Redevelopment of older industrial, civil and specialty structures drive most industrial demolition calls from Plain View.
What Plain View’s soil means for industrial demolition
Wagram is the soil you are most likely to dig into in Plain View, per the USDA soil survey (3 of nine sampled points). It is well drained and sandy and fast-draining (hydrologic group A), on mapped slopes of 0–6%. The seasonal water table can rise to about 4 feet below the surface and the survey rates the ground “somewhat limited” for homes with basements.
Industrial Demolition around Plain View and Sampson County
About 26 miles from Fayetteville, Plain View is part of our Sampson County service area for industrial demolition.
At roughly 203 feet of elevation, Plain View has its own character; see Plain View on Wikipedia.
Check the Sampson County website for Plain View’s current fees and permit desks.
Close to Plain View, the same industrial demolition service covers Spivey's Corner, Dunn, Falcon and Godwin.
Industrial Demolition near Plain View landmarks
- John E. Wilson House (about 3 mi from Plain View). The streets near John E. Wilson House are part of our Plain View service area for industrial demolition.
Where debris from industrial demolition in Plain View goes
Mixed demolition debris from Plain View can go to Harnett County Dunn-Erwin C&D Landfill, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 10 miles off. Inert debris such as concrete and brick can also go to Harnett County-Dunn/Erwin LCID Landfill, a permitted LCID landfill roughly 10 miles from Plain View.
Industrial Demolition permits and regulations in Plain View
Specialty work in Plain View starts with a permit from the Sampson County inspections office, plus any engineering or agency approvals the method needs. Unincorporated Plain View is usually permitted by Sampson County; we check for any town jurisdiction first, then file. Asbestos rules for Plain View are set by the state Health Hazards Control Unit. The state asks for demolition notices at least 10 working days before work starts and strongly recommends an asbestos inspection for every building, including single-family homes.
NC DEQ: Brownfields Program, EPA: Polychlorinated biphenyls (PCBs), EPA: Brownfields and OSHA: Demolition safety set the standards we work to in Plain View. Flood maps for Plain View are on the NC Flood Risk Information System.
When to book industrial demolition in Plain View
At about 203 feet above sea level, Plain View is in hurricane country, with storm season running June to November and a water table close to the surface. November through April is usually the best window for industrial demolition here, with milder weather and firmer ground once the storm season eases; August and September are the hardest months.
For Plain View, the regional storm record includes this: record rain from Hurricane Florence in 2018 flooded much of southeastern North Carolina, and many homes were demolished in the recovery.
Pricing industrial demolition in Plain View
What is specific to pricing industrial demolition in Plain View:
- Coastal permitting. Sampson County coastal and flood rules can add paperwork.
Map of our Plain View industrial demolition area
Book industrial demolition in Plain View
PLAIN VIEW · SAMPSON COUNTY
Need industrial demolition in Plain View?
Get a fixed industrial demolition price for your Plain View property after a free visit.