COATS · HARNETT COUNTY · NC

Land Grading in Coats, NC

Local land grading for Coats, a town of about 2,317: we visit, quote a fixed price and handle the work end to end.

Service areaCoats & Harnett County
PopulationAbout 2,317 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free land grading quote in Coats

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Coats land grading, start to finish

Coats grew about 8.0% between 2020 and 2024, faster than North Carolina as a whole.

Our land grading page explains the work in general; below is what changes in Coats.

QUICK ANSWERS

Land Grading permit
Needed for an acre or more; we check and file
Nearest large city
Apex, about 25 miles
Typical home built
1977 (58% before 1980)
Median home value
$117,000
Best months
November through April

What Coats’ homes tell us about land grading

With 11% of housing built after 2010, Coats is mostly built out, and land grading work reflects that (American Community Survey).

Housing in Coats breaks down as 70% detached houses, 8% apartments and condos, 5% mobile homes. Expect land grading in Coats to range from small lots to multi-unit properties.

Who needs land grading in Coats

Coats had 2,146 residents at the 2020 baseline, and the U.S. Census Bureau estimates 2,317 by July 2024, growth of 8.0%, ahead of the statewide 5.8%.

New homes and developments that need land cleared, dug and graded: that is where most Coats land grading calls come from.

What Coats’ soil means for land grading

Dothan is the soil you are most likely to dig into in Coats, per the USDA soil survey (4 of nine sampled points). It is well drained and moderately fast-draining (hydrologic group B), on mapped slopes of 0–15%. The seasonal water table can rise to about 4 feet below the surface.

With slopes up to 15% in places, Coats jobs on the grade use smaller machines and stabilize soil quickly.

Where we provide land grading near Coats

About 25 miles from Apex, Coats is part of our Harnett County service area for land grading.

At roughly 308 feet of elevation, Coats has its own character; see Coats on Wikipedia.

Check the Town of Coats website and the Harnett County website for Coats’ current fees and permit desks.

Land Grading is also available in Lillington, Angier, Bunnlevel, Mamers, Anderson Creek and Spout Springs, all in Harnett County.

Close to Coats, the same land grading service covers Buies Creek, Erwin, Dunn and Benson.

Permitted disposal sites for land grading near Coats

For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Harnett County-Dunn/Erwin LCID Landfill (Harnett County), roughly 3 miles from Coats, per the NC DEQ Solid Waste Section. Mixed demolition debris from Coats can go to Harnett County Dunn-Erwin C&D Landfill, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 3 miles off.

Permits and rules for land grading in Coats

In Coats, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the Town of Coats or the Harnett County inspections office may also want a grading permit. The Town of Coats or Harnett County inspections office issues the permit, and we handle the application for your Coats property.

NC DEQ: Erosion and sediment control, NC DEQ: Stormwater program and EPA: Construction stormwater set the standards we work to in Coats. Flood maps for Coats are on the NC Flood Risk Information System.

Best time for land grading in Coats

At about 308 feet above sea level, Coats sees long, humid summers and a hurricane season from June through November; low ground stays wet for days after heavy rain. Most Coats customers book land grading for November through April. August and September bring the height of storm season, when heat and flooding halt work.

For Coats, the regional storm record includes this: hurricane Fran in September 1996 carried hurricane-force winds inland to the Triangle, toppling trees onto homes across the region.

Coats land grading pricing factors

On top of the usual factors, a Coats quote reflects:

  • Coats home values. The typical Coats home is valued near $117,000, a useful yardstick when deciding whether land grading pays off at sale or rebuild.
  • Floodplain steps. Low Coats lots may need flood or coastal approvals first.

Map of our Coats land grading area

Book land grading in Coats

COATS · HARNETT COUNTY

Need land grading in Coats?

Get a fixed land grading price for your Coats property after a free visit.

LIVE · NATIONAL WEATHER SERVICE

Land Grading weather outlook for Coats this week

How the next seven days in Coats, Harnett County affect land grading, from the official National Weather Service forecast.

Loading the latest forecast for Coats…

READY TO CLEAR THE SITE?

Tell us about your land grading project in Coats.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Land Grading in Coats: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Who issues permits for land grading in Coats?

In Coats, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the Town of Coats or the Harnett County inspections office may also want a grading permit.

Where can I check Coats permit rules myself?

The Town of Coats website publishes local ordinances and permit contacts, and Harnett County’s site covers county-level rules.

How does Coats’ ground affect land grading?

The USDA soil survey shows mostly Dothan soils, well drained and a seasonal water table that can rise to about 4 feet.

Where does the debris from Coats jobs go?

For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Harnett County-Dunn/Erwin LCID Landfill (Harnett County), roughly 3 miles from Coats, per the NC DEQ Solid Waste Section. Mixed demolition debris from Coats can go to Harnett County Dunn-Erwin C&D Landfill, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 3 miles off.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp