MCLEANSVILLE · GUILFORD COUNTY · NC

Land Grading in McLeansville, NC

Local land grading for McLeansville: we visit, quote a fixed price and handle the work end to end.

Service areaMcLeansville & Guilford County
PopulationAbout 930
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free land grading quote in McLeansville

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Land Grading in McLeansville

Greensboro is 9 miles from McLeansville, and we cover both.

Our land grading page explains the work in general; below is what changes in McLeansville.

QUICK ANSWERS

Land Grading permit
Needed for an acre or more; we check and file
Main soil
Enon (well drained)
County
Guilford County
Nearest large city
Greensboro, about 9 miles
Typical home built
1983 (42% before 1980)

What McLeansville’s homes tell us about land grading

With McLeansville homes at $166,000 versus $235,000 countywide, fixed pricing for land grading matters (American Community Survey).

Homeowners own 82% of occupied homes in McLeansville (statewide: 66%), and they make up most of our land grading work there.

Who needs land grading in McLeansville

About 930 people live in unincorporated McLeansville, where Guilford County sets most of the rules.

Builders pulled permits for 579 new homes and apartments in unincorporated Guilford County, which includes McLeansville in 2024, 579 of them single-family, per the Census Bureau building permits survey.

What McLeansville’s soil means for land grading

Across McLeansville, the most common soil in the USDA soil survey is the Enon series (4 of nine sample points). It is well drained and slow to absorb rain (hydrologic group C), on mapped slopes of 0–10%. The seasonal water table can rise to about 1 foot below the surface.

Slow-draining ground sheds rain instead of soaking it up, so McLeansville sites get silt fence and positive drainage as soon as soil is exposed. A water table near 1 foot means land grading in McLeansville is easiest in dry weather, with dewatering ready for a wet spell.

Land Grading around McLeansville and Guilford County

About 9 miles from Greensboro, McLeansville is part of our Guilford County service area for land grading.

At roughly 748 feet of elevation, McLeansville has its own character; see McLeansville on Wikipedia.

Local permit offices, fee schedules and notices are published on the Guilford County website.

Land Grading is also available in Greensboro, Pleasant Garden, Summerfield, Jamestown, Oak Ridge and Stokesdale, all in Guilford County.

Close to McLeansville, the same land grading service covers Sedalia, Whitsett, Gibsonville and Forest Oaks.

Land Grading near McLeansville landmarks

  • Charles Benbow House (about 2 mi from McLeansville). Charles Benbow House is a familiar McLeansville reference point; homes and businesses around it are part of our land grading area.
  • Buffalo Creek (about 2 mi from McLeansville). Jobs in the area around Buffalo Creek get extra erosion control, because bare soil from land grading washes quickly into nearby water.

Permitted disposal sites for land grading near McLeansville

For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Fryar Grading and Hauling LCID Landfill in McLeansville (Guilford County), roughly 1 miles from McLeansville, per the NC DEQ Solid Waste Section. Mixed demolition debris from McLeansville can go to Greensboro, City of White Street Landfill, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 4 miles off.

McLeansville rules that apply to land grading

In McLeansville, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the Guilford County inspections office may also want a grading permit. Unincorporated McLeansville is usually permitted by Guilford County; we check for any town jurisdiction first, then file.

For land grading in McLeansville, the rules come from NC DEQ: Erosion and sediment control, NC DEQ: Stormwater program and EPA: Construction stormwater.

Best time for land grading in McLeansville

At about 748 feet above sea level, McLeansville has Piedmont weather: steamy summers, pop-up storms and occasional winter ice. For land grading in McLeansville, aim for October and November: mild weather and dry clay that holds equipment. Avoid July and August if you can, given humid afternoons and downpours that stall grading.

For McLeansville, the regional storm record includes this: the ice storm of December 2002 brought down trees and power lines across the central Piedmont.

McLeansville land grading pricing factors

On top of the usual factors, a McLeansville quote reflects:

  • McLeansville home values. The typical McLeansville home is valued near $166,000, a useful yardstick when deciding whether land grading pays off at sale or rebuild.

Land Grading near McLeansville: map

Get a free land grading quote in McLeansville

MCLEANSVILLE · GUILFORD COUNTY

Need land grading in McLeansville?

Get a fixed land grading price for your McLeansville property after a free visit.

LIVE · NATIONAL WEATHER SERVICE

Land Grading weather outlook for McLeansville this week

How the next seven days in McLeansville, Guilford County affect land grading, from the official National Weather Service forecast.

Loading the latest forecast for McLeansville…

READY TO CLEAR THE SITE?

Tell us about your land grading project in McLeansville.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Land Grading in McLeansville: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
What permits does land grading need in McLeansville?

In McLeansville, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the Guilford County inspections office may also want a grading permit.

What will we dig into in McLeansville?

The USDA soil survey shows mostly Enon soils, well drained and a seasonal water table that can rise to about 1 foot.

Where does the debris from McLeansville jobs go?

For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Fryar Grading and Hauling LCID Landfill in McLeansville (Guilford County), roughly 1 miles from McLeansville, per the NC DEQ Solid Waste Section. Mixed demolition debris from McLeansville can go to Greensboro, City of White Street Landfill, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 4 miles off.

Is land grading worth it in McLeansville?

At a typical $166,000 per home in McLeansville, owners tend to compare the cost carefully against repair or resale. Our fixed price lets you weigh it with real numbers.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp