ROPER · WASHINGTON COUNTY · NC

Land Grading in Roper, NC

Local land grading for Roper, a town of about 469: we visit, quote a fixed price and handle the work end to end.

Service areaRoper & Washington County
PopulationAbout 469 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free land grading quote in Roper

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Land Grading services in Roper, NC

Roper lies in North Carolina’s Coastal Plain.

Our land grading page explains the work in general; below is what changes in Roper.

QUICK ANSWERS

Land Grading permit
Needed for an acre or more; we check and file
Elevation
About 10 ft
Main soil
Wahee (somewhat poorly drained)
Population
About 469 (2024 est.)
Typical home built
1972 (55% before 1980)

What Roper’s homes tell us about land grading

With 11% of housing built after 2010, Roper is mostly built out, and land grading work reflects that (American Community Survey).

In Roper, the housing stock is 60% detached houses, 6% apartments and condos, 10% mobile homes. Expect land grading in Roper to range from small lots to multi-unit properties.

Who needs land grading in Roper

Roper had 484 residents at the 2020 baseline, and the U.S. Census Bureau estimates 469 by July 2024, a decline of about 3.1%.

New homes and developments that need land cleared, dug and graded: that is where most Roper land grading calls come from.

What Roper’s soil means for land grading

The USDA soil survey maps Wahee soils at 5 of nine points we checked across Roper. They are somewhat poorly drained and slow to absorb rain (hydrologic group C/D, when drained), on mapped slopes of 0–3%. The seasonal water table can rise to about 1 foot below the surface.

Because Roper’s soil absorbs rain slowly, bare ground after land grading is graded to drain and stabilized quickly. A water table near 1 foot means land grading in Roper is easiest in dry weather, with dewatering ready for a wet spell.

Land Grading around Roper and Washington County

Roper is part of our Washington County service area for land grading.

At roughly 10 feet of elevation, Roper has its own character; see Roper on Wikipedia.

For local ordinances and permit contacts, see the Washington County website.

Close to Roper, the same land grading service covers Plymouth, Cape Colony, Creswell and Edenton.

Permitted disposal sites for land grading near Roper

For Roper, the closest permitted construction and demolition landfill is C & D Landfill Inc in Greenville (Pitt County), roughly 36 miles away, per the NC DEQ Solid Waste Section.

Roper rules that apply to land grading

In Roper, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the Town of Roper or the Washington County inspections office may also want a grading permit. The Town of Roper or Washington County inspections office issues the permit, and we handle the application for your Roper property.

Agencies whose rules apply to this work in Washington County: NC DEQ: Erosion and sediment control, NC DEQ: Stormwater program and EPA: Construction stormwater. Washington County is one of North Carolina's coastal counties, so work near water in Roper may need a permit from the NC Division of Coastal Management. Flood maps for Roper are on the NC Flood Risk Information System.

Best time for land grading in Roper

At about 10 feet above sea level, Roper sees long, humid summers and a hurricane season from June through November; low ground stays wet for days after heavy rain. For land grading in Roper, aim for November through April: milder weather and firmer ground once the storm season eases. Avoid August and September if you can, given storm threats and waterlogged lots that push jobs back.

For Roper, the regional storm record includes this: the Tar and Neuse basins flooded to record levels during Hurricane Floyd in 1999, and buyouts afterward led to many homes being torn down.

Roper land grading pricing factors

On top of the usual factors, a Roper quote reflects:

  • Roper home values. The typical Roper home is valued near $72,000, a useful yardstick when deciding whether land grading pays off at sale or rebuild.
  • Haul distance. With roughly 36 miles to the closest permitted site, fuller, fewer loads keep Roper haul costs down.
  • Floodplain steps. Low Roper lots may need flood or coastal approvals first.

Map of our Roper land grading area

Book land grading in Roper

ROPER · WASHINGTON COUNTY

Need land grading in Roper?

Get a fixed land grading price for your Roper property after a free visit.

LIVE · NATIONAL WEATHER SERVICE

Land Grading weather outlook for Roper this week

How the next seven days in Roper, Washington County affect land grading, from the official National Weather Service forecast.

Loading the latest forecast for Roper…

READY TO CLEAR THE SITE?

Tell us about your land grading project in Roper.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Land Grading in Roper: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Is a permit required for land grading in Roper?

In Roper, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the Town of Roper or the Washington County inspections office may also want a grading permit.

Can you work on a vacant or seasonal property in Roper?

Yes. About 24% of Roper’s homes are vacant at any time. We can handle land grading for absent owners, with photo updates and key or lockbox access.

What month should I book land grading in Roper?

In Roper, at about 10 feet, November through April tends to work best because of milder weather and firmer ground once the storm season eases; August and September bring storm threats and waterlogged lots that push jobs back.

Where does the debris from Roper jobs go?

For Roper, the closest permitted construction and demolition landfill is C & D Landfill Inc in Greenville (Pitt County), roughly 36 miles away, per the NC DEQ Solid Waste Section.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp