WALLACE · DUPLIN COUNTY · NC

Land Grading in Wallace, NC

Local land grading for Wallace, a town of about 3,531: we visit, quote a fixed price and handle the work end to end.

Service areaWallace & Duplin County
PopulationAbout 3,531 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free land grading quote in Wallace

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Land Grading in Wallace

Jacksonville is 34 miles from Wallace, and we cover both. Part of Wallace lies in Pender County.

Our land grading page explains the work in general; below is what changes in Wallace.

QUICK ANSWERS

Land Grading permit
Needed for an acre or more; we check and file
Nearest large city
Jacksonville, about 34 miles
Typical home built
1980 (49% before 1980)
Median home value
$193,000
Best months
November through April

What Wallace’s homes tell us about land grading

With 21% of housing built after 2010, Wallace is still growing outward, and land grading work reflects that (American Community Survey).

By building type, Wallace is 65% detached houses, 5% mobile homes. Expect land grading in Wallace to range from small lots to multi-unit properties.

Who needs land grading in Wallace

Wallace had 3,416 residents at the 2020 baseline, and the U.S. Census Bureau estimates 3,531 by July 2024, steady growth of 3.4%.

New homes and developments that need land cleared, dug and graded: that is where most Wallace land grading calls come from.

What Wallace’s soil means for land grading

The USDA soil survey maps Noboco soils at 3 of nine points we checked across Wallace. They are well drained and slow to absorb rain (hydrologic group C), on mapped slopes of 0–6%. The seasonal water table can rise to about 2 feet below the surface.

Slow-draining ground sheds rain instead of soaking it up, so Wallace sites get silt fence and positive drainage as soon as soil is exposed. A water table near 2 feet means land grading in Wallace is easiest in dry weather, with dewatering ready for a wet spell.

Where we provide land grading near Wallace

About 34 miles from Jacksonville, Wallace is part of our Duplin County service area for land grading.

At roughly 52 feet of elevation, Wallace has its own character; see Wallace on Wikipedia.

Local permit offices, fee schedules and notices are published on the Town of Wallace website and the Duplin County website.

Land Grading is also available in Beulaville, Warsaw, Potters Hill, Bowdens, Faison and Calypso, all in Duplin County.

Close to Wallace, the same land grading service covers Teachey, Watha, Rose Hill and Greenevers.

Land Grading near Wallace landmarks

  • Isaac M. Powers House (about 2 mi from Wallace). Properties in the neighborhoods around Isaac M. Powers House are covered by our Wallace land grading service, with access and parking checked at the site visit.
  • Henderson Field (about 2 mi from Wallace). With visitors heading to Henderson Field, we keep trucks off the busiest roads and times while land grading is underway.
  • Wallace Commercial Historic District (about 1 mi from Wallace). Work close to Wallace Commercial Historic District has to respect historic character. If a property sits inside a local historic district, land grading may need a Certificate of Appropriateness before anything is removed.

Permitted disposal sites for land grading near Wallace

For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Duplin County LCID Landfill in Rose Hill (Duplin County), roughly 8 miles from Wallace, per the NC DEQ Solid Waste Section. For Wallace, the closest permitted construction and demolition landfill is Delco Transfer and Recycling LLC (Former Big D T&P) (Columbus County), roughly 31 miles away, per the NC DEQ Solid Waste Section.

Land Grading permits and regulations in Wallace

In Wallace, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the Town of Wallace or the Duplin County inspections office may also want a grading permit. The Town of Wallace or Duplin County inspections office issues the permit, and we handle the application for your Wallace property.

For land grading in Wallace, the rules come from NC DEQ: Erosion and sediment control, NC DEQ: Stormwater program and EPA: Construction stormwater. Flood maps for Wallace are on the NC Flood Risk Information System.

Best time for land grading in Wallace

At about 52 feet above sea level, Wallace sees long, humid summers and a hurricane season from June through November; low ground stays wet for days after heavy rain. November through April is usually the best window for land grading here, with milder weather and firmer ground once the storm season eases; August and September are the hardest months.

For Wallace, the regional storm record includes this: hurricane Florence in September 2018 brought record rainfall and flooding to southeastern North Carolina, and many flood-damaged homes had to be taken down afterward.

Wallace land grading pricing factors

On top of the usual factors, a Wallace quote reflects:

  • Wallace home values. The typical Wallace home is valued near $193,000, a useful yardstick when deciding whether land grading pays off at sale or rebuild.
  • Haul distance. With roughly 31 miles to the closest permitted site, fuller, fewer loads keep Wallace haul costs down.
  • Flood and coastal rules. Low Wallace lots may need flood or coastal approvals first.

Land Grading near Wallace: map

Get a free land grading quote in Wallace

WALLACE · DUPLIN COUNTY

Need land grading in Wallace?

Get a fixed land grading price for your Wallace property after a free visit.

LIVE · NATIONAL WEATHER SERVICE

Land Grading weather outlook for Wallace this week

How the next seven days in Wallace, Duplin County affect land grading, from the official National Weather Service forecast.

Loading the latest forecast for Wallace…

READY TO CLEAR THE SITE?

Tell us about your land grading project in Wallace.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Land Grading in Wallace: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
What permits does land grading need in Wallace?

In Wallace, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the Town of Wallace or the Duplin County inspections office may also want a grading permit.

Can you take on a job close to W. Stokes Boney House?

It is. We plan land grading near W. Stokes Boney House around traffic, visitors and anything historic nearby.

What month should I book land grading in Wallace?

In Wallace, at about 52 feet, November through April tends to work best because of milder weather and firmer ground once the storm season eases; August and September bring tropical weather and soaked ground that make sites unworkable.

Where can I check Wallace permit rules myself?

The Town of Wallace website publishes local ordinances and permit contacts, and Duplin County’s site covers county-level rules.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp