Land Grading services in Washington, NC
Greenville is 18 miles from Washington, and we cover both.
For the full scope of the service, see our land grading page. Here we focus on Washington: its housing, rules, ground and weather.
QUICK ANSWERS
- Land Grading permit
- Needed for an acre or more; we check and file
- Main soil
- Altavista (moderately well drained)
- County
- Beaufort County
- Nearest large city
- Greenville, about 18 miles
- Typical home built
- 1970 (64% before 1980)
Land Grading and the Washington housing stock
7% of Washington’s homes were built since 2010, and population moved down 1.5% from 2020 to 2024, which tells you how much new ground is being opened for land grading (American Community Survey).
In Washington, the housing stock is 63% detached houses, 14% apartments and condos. That mix means land grading in Washington ranges from single homes to larger residential buildings.
Washington at a glance for land grading
From 9,884 people in 2020, Washington reached about 9,738 by mid-2024 according to the U.S. Census Bureau, a roughly stable population.
The Census Bureau building permits survey counts 27 new single-family homes authorized in Washington in 2024. Building is slow in Washington, so most land grading here is on existing properties rather than new developments.
Washington ground conditions and land grading
Altavista is the soil you are most likely to dig into in Washington, per the USDA soil survey (5 of nine sampled points, with built-over “urban land” at another 2). It is moderately well drained and slow to absorb rain (hydrologic group C), on mapped slopes of 0–3%. The seasonal water table can rise to about 2 feet below the surface.
Because Washington’s soil absorbs rain slowly, bare ground after land grading is graded to drain and stabilized quickly. With groundwater as close as 2 feet, open holes in Washington can take on water, so pumping is planned for wet months and fill goes in compacted layers.
Land Grading around Washington and Beaufort County
Washington is a Beaufort County community in North Carolina’s Coastal Plain, about 18 miles from Greenville.
According to Washington on Wikipedia, Washington was founded in 1776 and stands about 10 feet up, near Pamlico River.
For local ordinances and permit contacts, see the City of Washington website and the Beaufort County website.
Elsewhere in Beaufort County, our land grading pages cover Pinetown, Bath, Bayview, Pantego, Aurora and Belhaven.
Neighbors of Washington we serve: Washington Park, Chocowinity, Cypress Landing and River Road.
Landmarks around Washington and land grading
- Bank of Washington, West End Branch (about 1 mi from Washington). Bank of Washington, West End Branch is a familiar Washington reference point; homes and businesses around it are part of our land grading area.
- Beaufort County Community College. Busy destinations like Beaufort County Community College bring traffic, so we plan hauling routes and times for land grading to stay out of the way.
- North Market Street Historic District (about 1 mi from Washington). Work close to North Market Street Historic District has to respect historic character. If a property sits inside a local historic district, land grading may need a Certificate of Appropriateness before anything is removed.
Washington landfills and transfer stations for land grading
Loads of stumps, brush, soil and clean concrete that can’t be recycled can go to an LCID (land-clearing and inert debris) landfill; the closest on the NC DEQ Solid Waste Section permitted list is Craven LCID Landfill in New Bern, about 28 miles from Washington. The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is C & D Landfill Inc in Greenville, about 8 miles from Washington.
Washington rules that apply to land grading
Land disturbance in Washington of one acre or more needs an approved plan under the NC DEQ erosion and sediment control program, and the City of Washington or the Beaufort County inspections office may require a grading permit. When a permit is needed, we file it with the City of Washington or Beaufort County’s inspections office, whichever covers your address.
Agencies whose rules apply to this work in Beaufort County: NC DEQ: Erosion and sediment control, NC DEQ: Stormwater program and EPA: Construction stormwater. Beaufort County is one of North Carolina's coastal counties, so work near water in Washington may need a permit from the NC Division of Coastal Management. Flood maps for Washington are on the NC Flood Risk Information System.
Washington weather and land grading scheduling
Washington, around 10 feet up, is in hurricane country, with storm season running June to November and a water table close to the surface. Most Washington customers book land grading for November through April. August and September bring storm threats and waterlogged lots that push jobs back.
Hurricane Floyd’s 1999 floods along the Tar and Neuse rivers led to buyouts and the demolition of many flooded homes, a reminder for property owners across Beaufort County of how storms create demolition and clean-up work. Lots near Pamlico River get extra silt fence and runoff control during land grading.
Pricing land grading in Washington
Beyond size, materials and access, these Washington factors affect the price:
- Local property values. With a median home value near $194,000 in Washington, owners usually weigh the project against resale value, so we keep every line of the quote visible.
- Flood and coastal rules. Beaufort County coastal and flood rules can add paperwork.
Map of our Washington land grading area
Book land grading in Washington
WASHINGTON · BEAUFORT COUNTY
Need land grading in Washington?
Send your Washington address for a free site visit and a fixed, itemized quote.