Fontana Dam patio removal, start to finish
Fontana Dam lies in North Carolina’s mountain.
Our patio removal page explains the work in general; below is what changes in Fontana Dam.
QUICK ANSWERS
- Patio Removal permit
- Usually not needed; we confirm for your address
- County
- Graham County
- Region
- Mountains
- Elevation
- About 1,821 ft
- Main soil
- Spivey (well drained)
Fontana Dam housing and what it means for patio removal
1974 is the median build year in Fontana Dam, older than the Graham County median of 1987, per the American Community Survey, and 75% of homes predate 1980: a lot of the concrete around Fontana Dam homes is decades old and failing.
With 0% of housing built after 2010, Fontana Dam is mostly built out, and patio removal work reflects that.
Who needs patio removal in Fontana Dam
Fontana Dam had 11 residents at the 2020 baseline, and the U.S. Census Bureau estimates 11 by July 2024, a roughly stable population.
Here, demand for patio removal comes mostly from aging driveways, slabs and walls being replaced as homes are updated.
What Fontana Dam’s soil means for patio removal
The USDA soil survey maps Spivey soils at 3 of nine points we checked across Fontana Dam. They are well drained and sandy and fast-draining (hydrologic group A), on mapped slopes of 2–95%.
Fast-draining sand dries out quickly after rain, though it needs a firm, compacted base before any new paving in Fontana Dam.
Patio Removal around Fontana Dam and Graham County
Fontana Dam is part of our Graham County service area for patio removal.
At roughly 1,821 feet of elevation, Fontana Dam has its own character; see Fontana Dam on Wikipedia.
Check the Graham County website for Fontana Dam’s current fees and permit desks.
Close to Fontana Dam, the same patio removal service covers Lake Santeetlah, Robbinsville, Andrews and Marble.
Landmarks around Fontana Dam and patio removal
- Fontana Lake (about 2 mi from Fontana Dam). Jobs in the area around Fontana Lake get extra erosion control, because bare soil from patio removal washes quickly into nearby water.
Fontana Dam landfills and transfer stations for patio removal
For clean concrete, brick and block, the nearest permitted LCID landfill is Swain County LCID in Bryson City (Swain County), roughly 20 miles from Fontana Dam, per the NC DEQ Solid Waste Section. The nearest active C&D transfer station on the NC DEQ Solid Waste Section permitted list is Fisher C&D Transfer Station in Rosman, about 58 miles from Fontana Dam.
Patio Removal permits and regulations in Fontana Dam
Most Fontana Dam concrete removal needs no demolition permit; work touching the street, a curb cut or a state road is the exception and may need Town of Fontana Dam or NCDOT approval.
OSHA: Respirable crystalline silica, NC DEQ: Erosion and sediment control and EPA: Recycling basics set the standards we work to in Fontana Dam. Flood maps for Fontana Dam are on the NC Flood Risk Information System.
When to book patio removal in Fontana Dam
Fontana Dam, around 1,821 feet up, sees weather that changes with elevation: snow and ice in winter, and heavy rain that runs fast down steep ground. For patio removal in Fontana Dam, aim for late spring and early fall: stable weather between the spring thaw and the first frost. Avoid December through February if you can, given icy grades and frozen soil that keep machines off slopes.
For Fontana Dam, the regional storm record includes this: hurricane Helene in September 2024 caused catastrophic flooding and landslides across western North Carolina, and storm-damaged homes are still being cleared across the region.
Fontana Dam patio removal pricing factors
On top of the usual factors, a Fontana Dam quote reflects:
- Haul distance. With roughly 58 miles to the closest permitted site, fuller, fewer loads keep Fontana Dam haul costs down.
Map of our Fontana Dam patio removal area
Book patio removal in Fontana Dam
FONTANA DAM · GRAHAM COUNTY
Need patio removal in Fontana Dam?
Get a fixed patio removal price for your Fontana Dam property after a free visit.