About our selective demolition work in Aulander
Our Coastal Plain crews cover Aulander.
Our selective demolition page explains the work in general; below is what changes in Aulander.
QUICK ANSWERS
- Selective Demolition permit
- Required; we file it with the Town of Aulander or county
- Region
- Coastal Plain
- Owner-occupied homes
- 61%
- Elevation
- About 66 ft
- Main soil
- Lenoir (somewhat poorly drained)
Selective Demolition and the Aulander housing stock
1974 is the median build year in Aulander, older than the Bertie County median of 1980, per the American Community Survey, and 55% of homes predate 1980: older materials like asbestos siding, floor tile and lead paint are a real possibility in Aulander, so we test before any teardown.
$88,000 is the typical Aulander home value, similar to Bertie County.
Who needs selective demolition in Aulander
Aulander had 757 residents at the 2020 baseline, and the U.S. Census Bureau estimates 718 by July 2024, a decline of about 5.2%.
Here, demand for selective demolition comes mostly from older buildings reaching the end of their life and lots being cleared for new construction.
Selective Demolition around Aulander and Bertie County
In Bertie County’s part of the Coastal Plain, Aulander has flat, sandy ground that holds water after storms; our selective demolition plan starts from that.
At roughly 66 feet of elevation, Aulander has its own character; see Aulander on Wikipedia.
Aulander residents can find ordinances and permit contacts on the Bertie County website.
Close to Aulander, the same selective demolition service covers Kelford, Roxobel, Ahoskie and Lewiston Woodville.
Permitted disposal sites for selective demolition near Aulander
Mixed demolition debris from Aulander can go to Edgecombe County CDLF in Tarboro, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 38 miles off.
Selective Demolition permits and regulations in Aulander
Demolishing a building in Aulander requires a permit from the Town of Aulander or the Bertie County inspections office. When a permit is needed, we file it with the Town of Aulander or Bertie County’s inspections office, whichever covers your address. 55% of Aulander’s homes predate 1980, so asbestos rules from the state Health Hazards Control Unit apply to many jobs here.
We follow the requirements of OSHA: Demolition safety, OSHA: Respirable crystalline silica, EPA: Lead Renovation, Repair and Painting and EPA: Indoor air quality on every Aulander job. Bertie County is one of North Carolina's coastal counties, so work near water in Aulander may need a permit from the NC Division of Coastal Management. Flood maps for Aulander are on the NC Flood Risk Information System.
When to book selective demolition in Aulander
Sitting near 66 feet, Aulander is in hurricane country, with storm season running June to November and a water table close to the surface. For selective demolition in Aulander, aim for November through April: milder weather and firmer ground once the storm season eases. Avoid August and September if you can, given peak hurricane season, heavy heat and saturated ground that stop work.
For Aulander, the regional storm record includes this: hurricane Floyd’s 1999 floods along the Tar and Neuse rivers led to buyouts and the demolition of many flooded homes.
Aulander selective demolition pricing factors
What is specific to pricing selective demolition in Aulander:
- Local property values. With a median home value near $88,000 in Aulander, owners usually weigh removal against renovation, so we keep every line of the quote visible.
- Haul distance. With roughly 38 miles to the closest permitted site, fuller, fewer loads keep Aulander haul costs down.
- Floodplain steps. Floodplain or CAMA steps can apply in Bertie County.
Selective Demolition near Aulander: map
Get a free selective demolition quote in Aulander
AULANDER · BERTIE COUNTY
Need selective demolition in Aulander?
Get a fixed selective demolition price for your Aulander property after a free visit.