Selective Demolition services in Hays, NC
Hays lies in North Carolina’s mountain.
Everything the service includes is set out on our main selective demolition page; this page covers what is specific to Hays.
QUICK ANSWERS
- Selective Demolition permit
- Required; we file it with the county
- County
- Wilkes County
- Region
- Mountains
- Owner-occupied homes
- 91%
- Elevation
- About 1,348 ft
Selective Demolition and the Hays housing stock
Of Hays’ roughly 745 homes, 35% were built before 1980 and the median dates from 1991, newer than the Wilkes County median of 1980 (American Community Survey). In practice, many Hays teardowns start with an asbestos and lead survey.
$159,000 is the typical Hays home value, similar to Wilkes County.
Hays’ growth and demand for selective demolition
About 1,400 people live in unincorporated Hays, where Wilkes County sets most of the rules.
Builders pulled permits for 133 new homes and apartments in unincorporated Wilkes County, which includes Hays in 2024, 133 of them single-family, per the Census Bureau building permits survey.
Hays and nearby towns for selective demolition
Hays sits in Wilkes County, in the Mountains, where the ground is grades, rock and winding access. That affects how we stage equipment and protect the site.
Hays sits about 1,348 feet above sea level (Hays on Wikipedia).
For local ordinances and permit contacts, see the Wilkes County website.
We also provide selective demolition in Mulberry, Fairplains, North Wilkesboro and Cricket.
Selective Demolition near Hays landmarks
- Wilkes County Airport (about 2 mi from Hays). Traffic around Wilkes County Airport shapes our schedule: trucks for selective demolition are timed around event days, peak hours and road closures nearby.
Permitted disposal sites for selective demolition near Hays
Mixed demolition debris from Hays can go to Alexander County CDLF in Taylorsville, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 28 miles off. Inert debris such as concrete and brick can also go to Ashe County LCID Facility in Crumpler, a permitted LCID landfill roughly 23 miles from Hays.
Permits and rules for selective demolition in Hays
Demolishing a building in Hays requires a permit from the Wilkes County inspections office. When a permit is needed, we file it with Wilkes County’s inspections office, or a nearby town if the lot is in its jurisdiction. 35% of Hays’ homes predate 1980, so asbestos rules from the state Health Hazards Control Unit apply to many jobs here.
Agencies whose rules apply to this work in Wilkes County: OSHA: Demolition safety, OSHA: Respirable crystalline silica, EPA: Lead Renovation, Repair and Painting and EPA: Indoor air quality. Flood maps for Hays are on the NC Flood Risk Information System.
When to book selective demolition in Hays
Sitting near 1,348 feet, Hays has mountain weather, with cold winters and summer downpours that test every slope. For selective demolition in Hays, aim for late spring and early fall: mild temperatures and dependable ground before summer storms or winter freezes. Avoid December through February if you can, given freezing conditions that make hillside work unsafe.
Wilkes County remembers its storms. The flooding and landslides of Hurricane Helene in late September 2024 left damaged structures across the mountains that are still coming down.
Hays selective demolition pricing factors
What is specific to pricing selective demolition in Hays:
- Local property values. With a median home value near $159,000 in Hays, owners usually weigh removal against renovation, so we keep every line of the quote visible.
- Haul distance. The nearest permitted facility for this debris is about 28 miles from Hays, so trucking time is part of the price.
- Slope. Steep Hays sites need smaller machines and more protection.
Map of our Hays selective demolition area
Book selective demolition in Hays
HAYS · WILKES COUNTY
Need selective demolition in Hays?
One call or message gets a free Hays site visit and a price with every line spelled out.