GIBSONVILLE · GUILFORD COUNTY · NC

Industrial Demolition in Gibsonville, NC

Industrial Demolition for Gibsonville properties, priced after a free visit and carried out by one Guilford County crew.

Service areaGibsonville & Guilford County
PopulationAbout 9,744 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free industrial demolition quote in Gibsonville

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Gibsonville industrial demolition, start to finish

Gibsonville grew about 9.0% between 2020 and 2024, faster than North Carolina as a whole. Part of Gibsonville lies in Alamance County.

For the full scope of the service, see our industrial demolition page. Here we focus on Gibsonville: its housing, rules, ground and weather.

QUICK ANSWERS

Industrial Demolition permit
Required; we file it with the Town of Gibsonville or county
Main soil
Enon (well drained)
Population
About 9,744 (2024 est.)
Region
Piedmont
Owner-occupied homes
83%

Industrial Demolition and the Gibsonville housing stock

Housing in Gibsonville breaks down as 84% detached houses, 4% mobile homes. Most Gibsonville industrial demolition jobs are on private single-family lots (American Community Survey).

35% of Gibsonville’s homes were built since 2010, and population moved up 9% from 2020 to 2024, which tells you how much new ground is being opened for industrial demolition.

Gibsonville at a glance for industrial demolition

U.S. Census Bureau figures show Gibsonville going from 8,943 residents (2020) to 9,744 (2024), growth of 9.0%, ahead of the statewide 5.8%.

Redevelopment of older industrial, civil and specialty structures: that is where most Gibsonville industrial demolition calls come from.

Gibsonville ground conditions and industrial demolition

Enon is the soil you are most likely to dig into in Gibsonville, per the USDA soil survey (3 of nine sampled points). It is well drained and slow to absorb rain (hydrologic group C), on mapped slopes of 0–10%. The seasonal water table can rise to about 2 feet below the surface and the survey rates the ground “somewhat limited” for homes with basements.

Because Gibsonville’s soil absorbs rain slowly, bare ground after industrial demolition is graded to drain and stabilized quickly. With groundwater as close as 2 feet, open holes in Gibsonville can take on water, so pumping is planned for wet months and fill goes in compacted layers.

Where we provide industrial demolition near Gibsonville

Gibsonville is a Guilford County community in North Carolina’s Piedmont, about 5 miles from Burlington.

According to Gibsonville on Wikipedia, Gibsonville is a long-standing community and stands about 732 feet up.

Check the Town of Gibsonville website and the Guilford County website for Gibsonville’s current fees and permit desks.

Industrial Demolition is also available in Greensboro, Pleasant Garden, Summerfield, Oak Ridge, Stokesdale and High Point, all in Guilford County.

Neighbors of Gibsonville we serve: Elon, Whitsett, Glen Raven and Burlington.

Landmarks around Gibsonville and industrial demolition

  • Holly Gate (about 2 mi from Gibsonville). The streets near Holly Gate are part of our Gibsonville service area for industrial demolition.
  • Schar Center (about 2 mi from Gibsonville). Busy destinations like Schar Center bring traffic, so we plan hauling routes and times for industrial demolition to stay out of the way.
  • Minneola Manufacturing Company Cloth Warehouse (about 1 mi from Gibsonville). Older industrial sites such as Minneola Manufacturing Company Cloth Warehouse are where careful dismantling pays off, with materials kept for reuse during industrial demolition.

Permitted disposal sites for industrial demolition near Gibsonville

Mixed demolition debris from Gibsonville can go to Greensboro, City of White Street Landfill, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 10 miles off. Inert debris such as concrete and brick can also go to Fryar Grading and Hauling LCID Landfill in McLeansville, a permitted LCID landfill roughly 8 miles from Gibsonville.

Industrial Demolition permits and regulations in Gibsonville

Large and specialty demolition in Gibsonville needs a demolition permit from the Town of Gibsonville or the Guilford County inspections office, and often engineering review and specialist permits too. The Town of Gibsonville or Guilford County inspections office issues the permit, and we handle the application for your Gibsonville property. For Gibsonville properties, the state Health Hazards Control Unit handles asbestos notices, and we file what is required before work starts.

NC DEQ: Brownfields Program, EPA: Polychlorinated biphenyls (PCBs), EPA: Brownfields and OSHA: Demolition safety set the standards we work to in Gibsonville.

Best time for industrial demolition in Gibsonville

Gibsonville, around 732 feet up, sees warm, wet summers and mild winters, with ice storms a few times a decade. For industrial demolition in Gibsonville, aim for October and November: steady temperatures and fewer afternoon storms. Avoid July and August if you can, given peak heat plus storms that leave clay sites too wet to work.

The ice storm of December 2002 brought down trees and power lines across the central Piedmont, a reminder for property owners across Guilford County of how storms create demolition and clean-up work.

Map of our Gibsonville industrial demolition area

Book industrial demolition in Gibsonville

GIBSONVILLE · GUILFORD COUNTY

Need industrial demolition in Gibsonville?

Send your Gibsonville address for a free site visit and a fixed, itemized quote.

LIVE · NATIONAL WEATHER SERVICE

Industrial Demolition weather outlook for Gibsonville this week

How the next seven days in Gibsonville, Guilford County affect industrial demolition, from the official National Weather Service forecast.

Loading the latest forecast for Gibsonville…

READY TO CLEAR THE SITE?

Tell us about your industrial demolition project in Gibsonville.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Industrial Demolition in Gibsonville: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Who issues permits for industrial demolition in Gibsonville?

Large and specialty demolition in Gibsonville needs a demolition permit from the Town of Gibsonville or the Guilford County inspections office, and often engineering review and specialist permits too.

Does the season matter for industrial demolition in Gibsonville?

Usually October and November, with steady temperatures and fewer afternoon storms. July and August are the hardest in Gibsonville, with peak heat plus storms that leave clay sites too wet to work.

Do you work near Minneola Manufacturing Company Cloth Warehouse in Gibsonville?

It is. We plan industrial demolition near Minneola Manufacturing Company Cloth Warehouse around traffic, visitors and anything historic nearby.

How does Gibsonville’s ground affect industrial demolition?

The USDA soil survey shows mostly Enon soils, well drained and a seasonal water table that can rise to about 2 feet.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp