BURLINGTON · ALAMANCE COUNTY · NC

Industrial Demolition in Burlington, NC

Planning industrial demolition in Burlington? We handle the permits, the work and the haul-off for a fixed, itemized price.

Service areaBurlington & Alamance County
PopulationAbout 61,365 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free industrial demolition quote in Burlington

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Burlington industrial demolition, start to finish

Our industrial demolition crews reach Burlington as part of the wider Greensboro area, 20 miles away. Part of Burlington lies in Guilford County.

The general process is on the industrial demolition page; this page is about doing it well in Burlington.

QUICK ANSWERS

Industrial Demolition permit
Required; we file it with the City of Burlington or county
Best months
October and November
New homes permitted, 2024
347
Population
About 61,365 (2024 est.)
Region
Piedmont

Burlington housing and what it means for industrial demolition

Housing in Burlington breaks down as 59% detached houses, 22% apartments and condos, 4% mobile homes. Because Burlington has a real mix of housing, industrial demolition jobs vary widely in size and access (American Community Survey).

New construction is a modest part of Burlington: 10% of homes date from 2010 or later, so industrial demolition demand follows redevelopment of existing lots.

What drives industrial demolition in Burlington

Burlington had 57,369 residents at the 2020 baseline, and the U.S. Census Bureau estimates 61,365 by July 2024, steady growth of 7.0%.

In a growing town like Burlington, most industrial demolition calls come from redevelopment of older industrial, civil and specialty structures.

Soil and ground conditions for industrial demolition in Burlington

The USDA soil survey maps Helena soils at 3 of nine points we checked across Burlington. They are well drained and slow to absorb rain (hydrologic group C), on mapped slopes of 0–25%. The seasonal water table can rise to about 2 feet below the surface and the survey rates the ground “very limited” for homes with basements.

For owners planning to rebuild with a basement, the “very limited” rating means drainage deserves attention from the start. Because Burlington’s soil absorbs rain slowly, bare ground after industrial demolition is graded to drain and stabilized quickly.

Brownfield sites and industrial demolition in Burlington

The NC Brownfields Program lists 13 sites in the Burlington area, including Alamance Foods Facility, Tarheel Army Missile Plant and AMI.

A Brownfields Agreement with NC DEQ can restrict digging, soil handling and future use; on these Burlington sites, industrial demolition starts with those restrictions.

Burlington and nearby towns for industrial demolition

Our industrial demolition crews cover Burlington and the rest of Alamance County, 20 miles from Greensboro.

Some background: incorporated or settled 1886, elevation near 633 feet (Burlington on Wikipedia).

Check the City of Burlington website and the Alamance County website for Burlington’s current fees and permit desks.

Elsewhere in Alamance County, our industrial demolition pages cover Graham and Mebane.

Elon, Glen Raven, Alamance and Gibsonville are a short drive from Burlington and on our industrial demolition schedule too.

Burlington places that shape our industrial demolition work

  • Efird Building. Efird Building is a familiar Burlington reference point; homes and businesses around it are part of our industrial demolition area.
  • Beverly Hills Historic District. Work close to Beverly Hills Historic District has to respect historic character. If a property sits inside a local historic district, industrial demolition may need a Certificate of Appropriateness before anything is removed.

Burlington landfills and transfer stations for industrial demolition

The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Tri-Corners C&D Landfill in Liberty, about 9 miles from Burlington. Inert debris such as concrete and brick can also go to Fryar Grading and Hauling LCID Landfill in McLeansville, a permitted LCID landfill roughly 12 miles from Burlington.

Permits and rules for industrial demolition in Burlington

Specialty work in Burlington starts with a permit from the City of Burlington or the Alamance County inspections office, plus any engineering or agency approvals the method needs. When a permit is needed, we file it with the City of Burlington or Alamance County’s inspections office, whichever covers your address. 54% of Burlington’s homes predate 1980, so asbestos rules from the state Health Hazards Control Unit apply to many jobs here.

NC DEQ: Brownfields Program, EPA: Polychlorinated biphenyls (PCBs), EPA: Brownfields and OSHA: Demolition safety set the standards we work to in Burlington.

Burlington weather and industrial demolition scheduling

Sitting near 633 feet, Burlington sees warm, wet summers and mild winters, with ice storms a few times a decade. October and November is usually the best window for industrial demolition here, with firm ground and comfortable working days; July and August are the hardest months.

Storm history matters in Alamance County: the ice storm of December 2002 brought down trees and power lines across the central Piedmont.

Map of our Burlington industrial demolition area

Book industrial demolition in Burlington

BURLINGTON · ALAMANCE COUNTY

Need industrial demolition in Burlington?

Tell us about the Burlington property and we will set up a free visit.

LIVE · NATIONAL WEATHER SERVICE

Industrial Demolition weather outlook for Burlington this week

How the next seven days in Burlington, Alamance County affect industrial demolition, from the official National Weather Service forecast.

Loading the latest forecast for Burlington…

READY TO CLEAR THE SITE?

Tell us about your industrial demolition project in Burlington.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Industrial Demolition in Burlington: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Who issues permits for industrial demolition in Burlington?

Specialty work in Burlington starts with a permit from the City of Burlington or the Alamance County inspections office, plus any engineering or agency approvals the method needs.

Are older homes in Burlington likely to contain asbestos?

Census estimates put the median Burlington home at 1977, with 54% built before 1980 and 8% before 1940. Asbestos was common in homes of that era, so many Burlington jobs need testing under the state Health Hazards Control Unit's rules before work starts.

Which season suits industrial demolition in Burlington best?

In Burlington, at about 633 feet, October and November tends to work best because of firm ground and comfortable working days; July and August bring peak heat plus storms that leave clay sites too wet to work.

Where does the debris from Burlington jobs go?

The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Tri-Corners C&D Landfill in Liberty, about 9 miles from Burlington. Inert debris such as concrete and brick can also go to Fryar Grading and Hauling LCID Landfill in McLeansville, a permitted LCID landfill roughly 12 miles from Burlington.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp