Industrial Demolition in White Plains
Winston-Salem is 32 miles from White Plains, and we cover both.
Our industrial demolition page explains the work in general; below is what changes in White Plains.
QUICK ANSWERS
- Industrial Demolition permit
- Required; we file it with the county
- Main soil
- Fairview (well drained)
- Population
- About 770
- Region
- Piedmont
- Owner-occupied homes
- 75%
What White Plains’ homes tell us about industrial demolition
By building type, White Plains is 67% detached houses, 21% mobile homes. With mobile homes this common, industrial demolition in White Plains regularly includes older units and their pads.
1971 is the median build year in White Plains, older than the Surry County median of 1980, per the American Community Survey, and 62% of homes predate 1980: older structures around White Plains are more likely to contain hazardous materials that must come out before demolition.
Who needs industrial demolition in White Plains
White Plains is an unincorporated community of about 770 people in Surry County, so county rules generally apply rather than a town’s.
Most industrial demolition requests here come from redevelopment of older industrial, civil and specialty structures.
What White Plains’ soil means for industrial demolition
Fairview is the soil you are most likely to dig into in White Plains, per the USDA soil survey (5 of nine sampled points). It is well drained and moderately fast-draining (hydrologic group B), on mapped slopes of 2–25%. Bedrock can sit as shallow as about 2 feet and the survey rates the ground “very limited” for homes with basements.
Where rock is within 2 feet, deep industrial demolition work in White Plains may need breaking or ripping, which we check at the site visit. For owners planning to rebuild with a basement, the “very limited” rating means drainage deserves attention from the start.
Where we provide industrial demolition near White Plains
About 32 miles from Winston-Salem, White Plains is part of our Surry County service area for industrial demolition.
At roughly 1,119 feet of elevation, White Plains has its own character; see White Plains on Wikipedia.
Local permit offices, fee schedules and notices are published on the Surry County website.
Close to White Plains, the same industrial demolition service covers Toast, Mount Airy, Dobson and Flat Rock.
Industrial Demolition near White Plains landmarks
- Beech Creek (about 2 mi from White Plains). Jobs in the area around Beech Creek get extra erosion control, because bare soil from industrial demolition washes quickly into nearby water.
- Burkes Creek (about 1 mi from White Plains). Burkes Creek is a familiar White Plains reference point; homes and businesses around it are part of our industrial demolition area.
Where debris from industrial demolition in White Plains goes
Mixed demolition debris from White Plains can go to Abbey Green Transfer Station in Winston-Salem, the nearest active C&D transfer station permitted by the NC DEQ Solid Waste Section, about 37 miles off. Clean concrete, brick and stumps have a closer option at Surry County LCID Facility in Mount Airy, an LCID landfill about 4 miles away.
Permits and rules for industrial demolition in White Plains
Specialty work in White Plains starts with a permit from the Surry County inspections office, plus any engineering or agency approvals the method needs. Unincorporated White Plains is usually permitted by Surry County; we check for any town jurisdiction first, then file. Asbestos rules for White Plains are set by the state Health Hazards Control Unit. The state asks for demolition notices at least 10 working days before work starts and strongly recommends an asbestos inspection for every building, including single-family homes.
For industrial demolition in White Plains, the rules come from NC DEQ: Brownfields Program, EPA: Polychlorinated biphenyls (PCBs), EPA: Brownfields and OSHA: Demolition safety.
When to book industrial demolition in White Plains
At about 1,119 feet above sea level, White Plains sees warm, wet summers and mild winters, with ice storms a few times a decade. For industrial demolition in White Plains, aim for October and November: mild weather and dry clay that holds equipment. Avoid July and August if you can, given humid afternoons and downpours that stall grading.
Pricing industrial demolition in White Plains
What is specific to pricing industrial demolition in White Plains:
- Haul distance. With roughly 37 miles to the closest permitted site, fuller, fewer loads keep White Plains haul costs down.
Industrial Demolition near White Plains: map
Get a free industrial demolition quote in White Plains
WHITE PLAINS · SURRY COUNTY
Need industrial demolition in White Plains?
Get a fixed industrial demolition price for your White Plains property after a free visit.