ELM CITY · WILSON COUNTY · NC

Excavation, Grading & Restoration in Elm City, NC

Excavation, Grading & Restoration in Elm City and across Wilson County, with a free site visit, a fixed quote and one crew from start to finish.

Service areaElm City & Wilson County
PopulationAbout 1,223 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free excavation, grading & restoration quote in Elm City

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Excavation, Grading & Restoration services in Elm City, NC

Elm City is about 12 miles from Rocky Mount, and our crews work across the area. Part of Elm City lies in Nash County.

Everything the service includes is set out on our main excavation, grading & restoration page; this page covers what is specific to Elm City.

Services in this group available in Elm City: Fire & Water Restoration, Environmental Remediation, Excavation, Land Grading and Furniture Removal.

QUICK ANSWERS

Excavation & Grading permit
Needed for an acre or more; we check and file
Best months
November through April
County
Wilson County
Nearest large city
Rocky Mount, about 12 miles
Typical home built
1978 (56% before 1980)

Excavation, Grading & Restoration and the Elm City housing stock

New construction is a modest part of Elm City: 0% of homes date from 2010 or later, so excavation, grading & restoration demand follows redevelopment of existing lots (American Community Survey).

In Elm City, the housing stock is 74% detached houses, 8% mobile homes. Because Elm City has a real mix of housing, excavation, grading & restoration jobs vary widely in size and access.

Elm City’s growth and demand for excavation, grading & restoration

Elm City had 1,216 residents at the 2020 baseline, and the U.S. Census Bureau estimates 1,223 by July 2024, a roughly stable population.

In a settled town like Elm City, most excavation, grading & restoration calls come from new homes and developments that need land cleared, dug and graded.

Elm City ground conditions and excavation, grading & restoration

Rains is the soil you are most likely to dig into in Elm City, per the USDA soil survey (4 of nine sampled points). It is moderately well drained and moderately fast-draining (hydrologic group B), on mapped slopes of 0–5%.

Where we provide excavation, grading & restoration near Elm City

About 12 miles from Rocky Mount, Elm City is part of our Wilson County service area for excavation, grading & restoration.

Elm City sits about 135 feet above sea level (Elm City on Wikipedia).

For local ordinances and permit contacts, see the Town of Elm City website and the Wilson County website.

Other Wilson County communities we serve for excavation, grading & restoration: Sims, Black Creek, Lucama and Stantonsburg.

We also provide excavation, grading & restoration in Sharpsburg, Wilson, Macclesfield and Saratoga.

Landmarks around Elm City and excavation, grading & restoration

  • Elm City Municipal Historic District (about 1 mi from Elm City). Work close to Elm City Municipal Historic District has to respect historic character. If a property sits inside a local historic district, excavation, grading & restoration may need a Certificate of Appropriateness before anything is removed.
  • W. H. Langley House (about 1 mi from Elm City). W. H. Langley House is a familiar Elm City reference point; homes and businesses around it are part of our excavation, grading & restoration area.

Permitted disposal sites for excavation, grading & restoration near Elm City

Loads of stumps, brush, soil and clean concrete that can’t be recycled can go to an LCID (land-clearing and inert debris) landfill; the closest on the NC DEQ Solid Waste Section permitted list is Barnhill Contracting LCID Landfill in Rocky Mount, about 14 miles from Elm City. The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Wilson County Westside C&D Landfill (Areas 1 and 2), about 6 miles from Elm City.

Permits and rules for excavation, grading & restoration in Elm City

Land disturbance in Elm City of one acre or more needs an approved plan under the NC DEQ erosion and sediment control program, and the Town of Elm City or the Wilson County inspections office may require a grading permit. When a permit is needed, we file it with the Town of Elm City or Wilson County’s inspections office, whichever covers your address.

Agencies whose rules apply to this work in Wilson County: NC 811, NC DEQ: Erosion and sediment control, NC DEQ: Brownfields Program and EPA: Mold. Flood maps for Elm City are on the NC Flood Risk Information System.

Elm City weather and excavation, grading & restoration scheduling

At about 135 feet above sea level, Elm City sees long, humid summers and a hurricane season from June through November; low ground stays wet for days after heavy rain. Most Elm City customers book excavation, grading & restoration for November through April. August and September bring storm threats and waterlogged lots that push jobs back.

Wilson County remembers its storms. Hurricane Floyd’s 1999 floods along the Tar and Neuse rivers led to buyouts and the demolition of many flooded homes.

Elm City excavation, grading & restoration pricing factors

What is specific to pricing excavation, grading & restoration in Elm City:

  • What the property is worth. Elm City homes have a median value of about $107,000; that context shapes how much a excavation, grading & restoration project makes sense.
  • Coastal permitting. Floodplain or CAMA steps can apply in Wilson County.

Map of our Elm City excavation, grading & restoration area

Book excavation, grading & restoration in Elm City

ELM CITY · WILSON COUNTY

Need excavation, grading & restoration in Elm City?

One call or message gets a free Elm City site visit and a price with every line spelled out.

LIVE · NATIONAL WEATHER SERVICE

Excavation, Grading & Restoration weather outlook for Elm City this week

How the next seven days in Elm City, Wilson County affect excavation, grading & restoration, from the official National Weather Service forecast.

Loading the latest forecast for Elm City…

READY TO CLEAR THE SITE?

Tell us about your excavation, grading & restoration project in Elm City.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Excavation, Grading & Restoration in Elm City: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Is a permit required for excavation, grading & restoration in Elm City?

Land disturbance in Elm City of one acre or more needs an approved plan under the NC DEQ erosion and sediment control program, and the Town of Elm City or the Wilson County inspections office may require a grading permit.

When is the best time of year for excavation, grading & restoration in Elm City?

Usually November through April, with cooler days, drier ground and hurricane season winding down or over. August and September are the hardest in Elm City, with storm threats and waterlogged lots that push jobs back.

Where does the debris from Elm City jobs go?

Loads of stumps, brush, soil and clean concrete that can’t be recycled can go to an LCID (land-clearing and inert debris) landfill; the closest on the NC DEQ Solid Waste Section permitted list is Barnhill Contracting LCID Landfill in Rocky Mount, about 14 miles from Elm City. The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Wilson County Westside C&D Landfill (Areas 1 and 2), about 6 miles from Elm City.

What will we dig into in Elm City?

The USDA soil survey shows mostly Rains soils, moderately well drained and a seasonal water table that can rise to about 2 feet.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp