ELM CITY · WILSON COUNTY · NC

Land Grading in Elm City, NC

Land Grading for Elm City properties, priced after a free visit and carried out by one Wilson County crew.

Service areaElm City & Wilson County
PopulationAbout 1,223 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free land grading quote in Elm City

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Elm City land grading, start to finish

Rocky Mount is 12 miles from Elm City, and we cover both. Part of Elm City lies in Nash County.

For the full scope of the service, see our land grading page. Here we focus on Elm City: its housing, rules, ground and weather.

QUICK ANSWERS

Land Grading permit
Needed for an acre or more; we check and file
Nearest large city
Rocky Mount, about 12 miles
Typical home built
1978 (56% before 1980)
Median home value
$107,000
Best months
November through April

Land Grading and the Elm City housing stock

0% of Elm City’s homes were built since 2010, and population moved up 0.6% from 2020 to 2024, which tells you how much new ground is being opened for land grading (American Community Survey).

Housing in Elm City breaks down as 74% detached houses, 8% mobile homes. That mix means land grading in Elm City ranges from single homes to larger residential buildings.

Elm City at a glance for land grading

From 1,216 people in 2020, Elm City reached about 1,223 by mid-2024 according to the U.S. Census Bureau, a roughly stable population.

In a settled town like Elm City, most land grading calls come from new homes and developments that need land cleared, dug and graded.

Elm City ground conditions and land grading

Rains is the soil you are most likely to dig into in Elm City, per the USDA soil survey (4 of nine sampled points). It is moderately well drained and moderately fast-draining (hydrologic group B), on mapped slopes of 0–5%. The seasonal water table can rise to about 2 feet below the surface.

With groundwater as close as 2 feet, open holes in Elm City can take on water, so pumping is planned for wet months and fill goes in compacted layers.

Land Grading around Elm City and Wilson County

Elm City is a Wilson County community in North Carolina’s Coastal Plain, about 12 miles from Rocky Mount.

According to Elm City on Wikipedia, Elm City is a long-standing community and stands about 135 feet up.

Check the Town of Elm City website and the Wilson County website for Elm City’s current fees and permit desks.

Elsewhere in Wilson County, our land grading pages cover Sims, Black Creek, Lucama and Stantonsburg.

Neighbors of Elm City we serve: Sharpsburg, Wilson, Macclesfield and Saratoga.

Landmarks around Elm City and land grading

  • Elm City Municipal Historic District (about 1 mi from Elm City). Around Elm City Municipal Historic District, older buildings carry historic value, so we check local district rules before land grading begins.
  • W. H. Langley House (about 1 mi from Elm City). Properties in the neighborhoods around W. H. Langley House are covered by our Elm City land grading service, with access and parking checked at the site visit.

Elm City landfills and transfer stations for land grading

Loads of stumps, brush, soil and clean concrete that can’t be recycled can go to an LCID (land-clearing and inert debris) landfill; the closest on the NC DEQ Solid Waste Section permitted list is Barnhill Contracting LCID Landfill in Rocky Mount, about 14 miles from Elm City. For Elm City, the closest permitted construction and demolition landfill is Wilson County Westside C&D Landfill (Areas 1 and 2) (Wilson County), roughly 6 miles away, per the NC DEQ Solid Waste Section.

Elm City rules that apply to land grading

Land disturbance in Elm City of one acre or more needs an approved plan under the NC DEQ erosion and sediment control program, and the Town of Elm City or the Wilson County inspections office may require a grading permit. When a permit is needed, we file it with the Town of Elm City or Wilson County’s inspections office, whichever covers your address.

NC DEQ: Erosion and sediment control, NC DEQ: Stormwater program and EPA: Construction stormwater set the standards we work to in Elm City. Flood maps for Elm City are on the NC Flood Risk Information System.

Elm City weather and land grading scheduling

Elm City, around 135 feet up, is in hurricane country, with storm season running June to November and a water table close to the surface. For land grading in Elm City, aim for November through April: fewer tropical systems and less standing water. Avoid August and September if you can, given the height of storm season, when heat and flooding halt work.

Hurricane Floyd’s 1999 floods along the Tar and Neuse rivers led to buyouts and the demolition of many flooded homes, a reminder for property owners across Wilson County of how storms create demolition and clean-up work.

Pricing land grading in Elm City

Beyond size, materials and access, these Elm City factors affect the price:

  • Local property values. With a median home value near $107,000 in Elm City, owners usually weigh the project against resale value, so we keep every line of the quote visible.
  • Coastal permitting. Wilson County coastal and flood rules can add paperwork.

Map of our Elm City land grading area

Book land grading in Elm City

ELM CITY · WILSON COUNTY

Need land grading in Elm City?

Send your Elm City address for a free site visit and a fixed, itemized quote.

LIVE · NATIONAL WEATHER SERVICE

Land Grading weather outlook for Elm City this week

How the next seven days in Elm City, Wilson County affect land grading, from the official National Weather Service forecast.

Loading the latest forecast for Elm City…

READY TO CLEAR THE SITE?

Tell us about your land grading project in Elm City.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Land Grading in Elm City: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Who issues permits for land grading in Elm City?

Land disturbance in Elm City of one acre or more needs an approved plan under the NC DEQ erosion and sediment control program, and the Town of Elm City or the Wilson County inspections office may require a grading permit.

Does the season matter for land grading in Elm City?

Usually November through April, with fewer tropical systems and less standing water. August and September are the hardest in Elm City, with the height of storm season, when heat and flooding halt work.

How does Elm City’s ground affect land grading?

The USDA soil survey shows mostly Rains soils, moderately well drained and a seasonal water table that can rise to about 2 feet.

How do Elm City home values affect land grading?

Elm City homes are worth about $107,000 at the median, and owners tend to compare the cost carefully against repair or resale. You see every cost before deciding anything in Elm City.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp