ELM CITY · WILSON COUNTY · NC

Patio Removal in Elm City, NC

Patio Removal in Elm City and across Wilson County, with a free site visit, a fixed quote and one crew from start to finish.

Service areaElm City & Wilson County
PopulationAbout 1,223 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free patio removal quote in Elm City

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Patio Removal services in Elm City, NC

Rocky Mount is 12 miles from Elm City, and we cover both. Part of Elm City lies in Nash County.

Everything the service includes is set out on our main patio removal page; this page covers what is specific to Elm City.

QUICK ANSWERS

Patio Removal permit
Usually not needed; we confirm for your address
Typical home built
1978 (56% before 1980)
Median home value
$107,000
Best months
November through April
County
Wilson County

Patio Removal and the Elm City housing stock

Of Elm City’s roughly 596 homes, 56% were built before 1980 and the median dates from 1978, older than the Wilson County median of 1985 (American Community Survey). In practice, a lot of the concrete around Elm City homes is decades old and failing.

Owner-occupancy in Elm City sits at 65%, close to 66% statewide, giving a mix of patio removal customers.

Elm City’s growth and demand for patio removal

U.S. Census Bureau figures show Elm City going from 1,216 residents (2020) to 1,223 (2024), a roughly stable population.

In a settled town like Elm City, most patio removal calls come from aging driveways, slabs and walls being replaced as homes are updated.

Soil and ground conditions for patio removal in Elm City

Across Elm City, the most common soil in the USDA soil survey is the Rains series (4 of nine sample points). It is moderately well drained and moderately fast-draining (hydrologic group B), on mapped slopes of 0–5%.

Where we provide patio removal near Elm City

Our patio removal crews cover Elm City and the rest of Wilson County, 12 miles from Rocky Mount.

Elm City sits about 135 feet above sea level (Elm City on Wikipedia).

For local ordinances and permit contacts, see the Town of Elm City website and the Wilson County website.

Other Wilson County communities we serve for patio removal: Sims, Black Creek, Lucama and Stantonsburg.

We also provide patio removal in Sharpsburg, Wilson, Macclesfield and Saratoga.

Patio Removal near Elm City landmarks

  • Elm City Municipal Historic District (about 1 mi from Elm City). Properties in the area around Elm City Municipal Historic District can fall under historic review, which adds a step before patio removal.
  • W. H. Langley House (about 1 mi from Elm City). W. H. Langley House is a familiar Elm City reference point; homes and businesses around it are part of our patio removal area.

Permitted disposal sites for patio removal near Elm City

Loads of clean concrete, brick and block that can’t be recycled can go to an LCID (land-clearing and inert debris) landfill; the closest on the NC DEQ Solid Waste Section permitted list is Barnhill Contracting LCID Landfill in Rocky Mount, about 14 miles from Elm City. For Elm City, the closest permitted construction and demolition landfill is Wilson County Westside C&D Landfill (Areas 1 and 2) (Wilson County), roughly 6 miles away, per the NC DEQ Solid Waste Section.

Permits and rules for patio removal in Elm City

Removing concrete on private property in Elm City usually doesn’t need a demolition permit, but driveway aprons, curb cuts and right-of-way work can need approval from the Town of Elm City, or NCDOT on a state road.

Agencies whose rules apply to this work in Wilson County: OSHA: Respirable crystalline silica, NC DEQ: Erosion and sediment control and EPA: Recycling basics. Flood maps for Elm City are on the NC Flood Risk Information System.

Elm City weather and patio removal scheduling

At about 135 feet above sea level, Elm City has hot, sticky summers, mild winters and Atlantic hurricane season from June through November. For patio removal in Elm City, aim for November through April: cooler days, drier ground and hurricane season winding down or over. Avoid August and September if you can, given storm threats and waterlogged lots that push jobs back.

Wilson County remembers its storms. The Tar and Neuse basins flooded to record levels during Hurricane Floyd in 1999, and buyouts afterward led to many homes being torn down.

What patio removal costs in Elm City

What is specific to pricing patio removal in Elm City:

  • What the property is worth. Elm City homes have a median value of about $107,000; that context shapes how much a patio removal project makes sense.
  • Floodplain steps. Wilson County coastal and flood rules can add paperwork.

Map of our Elm City patio removal area

Book patio removal in Elm City

ELM CITY · WILSON COUNTY

Need patio removal in Elm City?

One call or message gets a free Elm City site visit and a price with every line spelled out.

LIVE · NATIONAL WEATHER SERVICE

Patio Removal weather outlook for Elm City this week

How the next seven days in Elm City, Wilson County affect patio removal, from the official National Weather Service forecast.

Loading the latest forecast for Elm City…

READY TO CLEAR THE SITE?

Tell us about your patio removal project in Elm City.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Patio Removal in Elm City: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Is a permit required for patio removal in Elm City?

Removing concrete on private property in Elm City usually doesn’t need a demolition permit, but driveway aprons, curb cuts and right-of-way work can need approval from the Town of Elm City, or NCDOT on a state road.

How do Elm City home values affect patio removal?

Elm City homes are worth about $107,000 at the median, and owners tend to compare the cost carefully against repair or resale. A line-by-line Elm City quote makes the comparison simple.

Where can I check Elm City permit rules myself?

The Town of Elm City website publishes local ordinances and permit contacts, and Wilson County’s site covers county-level rules.

Where does the debris from Elm City jobs go?

Loads of clean concrete, brick and block that can’t be recycled can go to an LCID (land-clearing and inert debris) landfill; the closest on the NC DEQ Solid Waste Section permitted list is Barnhill Contracting LCID Landfill in Rocky Mount, about 14 miles from Elm City. For Elm City, the closest permitted construction and demolition landfill is Wilson County Westside C&D Landfill (Areas 1 and 2) (Wilson County), roughly 6 miles away, per the NC DEQ Solid Waste Section.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp