SWEPSONVILLE · ALAMANCE COUNTY · NC

Industrial Demolition in Swepsonville, NC

Planning industrial demolition in Swepsonville? We handle the permits, the work and the haul-off for a fixed, itemized price.

Service areaSwepsonville & Alamance County
PopulationAbout 2,582 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free industrial demolition quote in Swepsonville

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

About our industrial demolition work in Swepsonville

Swepsonville is about 7 miles from Burlington, and our crews work across the area.

The general process is on the industrial demolition page; this page is about doing it well in Swepsonville.

QUICK ANSWERS

Industrial Demolition permit
Required; we file it with the Town of Swepsonville or county
Main soil
Cullen (well drained)
Population
About 2,582 (2024 est.)
Region
Piedmont
Owner-occupied homes
90%

Swepsonville housing and what it means for industrial demolition

Swepsonville’s homes are 80% detached houses, 6% mobile homes. Detached homes dominate, so most industrial demolition in Swepsonville is done for individual owners on their own lots (American Community Survey).

New construction is a big part of Swepsonville: 45% of homes date from 2010 or later, so industrial demolition demand follows active development.

What drives industrial demolition in Swepsonville

Swepsonville had 2,452 residents at the 2020 baseline, and the U.S. Census Bureau estimates 2,582 by July 2024, steady growth of 5.3%.

In a growing town like Swepsonville, most industrial demolition calls come from redevelopment of older industrial, civil and specialty structures.

Soil and ground conditions for industrial demolition in Swepsonville

The USDA soil survey maps Cullen soils at 4 of nine points we checked across Swepsonville. They are well drained and moderately fast-draining (hydrologic group B), on mapped slopes of 0–45%. The seasonal water table can rise to about 2 feet below the surface and the survey rates the ground “very limited” for homes with basements.

For owners planning to rebuild with a basement, the “very limited” rating means drainage deserves attention from the start. A water table near 2 feet means industrial demolition in Swepsonville is easiest in dry weather, with dewatering ready for a wet spell.

Brownfield sites and industrial demolition in Swepsonville

4 properties in and around Swepsonville are enrolled in the NC Brownfields Program, among them Town of Swepsonville, Virginia Mills II and Cortina Fabrics.

A Brownfields Agreement with NC DEQ can restrict digging, soil handling and future use; on these Swepsonville sites, industrial demolition starts with those restrictions.

Swepsonville and nearby towns for industrial demolition

Our industrial demolition crews cover Swepsonville and the rest of Alamance County, 7 miles from Burlington.

Some background: elevation near 525 feet (Swepsonville on Wikipedia).

Swepsonville residents can find ordinances and permit contacts on the Town of Swepsonville website and the Alamance County website.

Elsewhere in Alamance County, our industrial demolition pages cover Burlington and Elon.

Graham, Haw River, Saxapahaw and Mebane are a short drive from Swepsonville and on our industrial demolition schedule too.

Swepsonville places that shape our industrial demolition work

  • Back Creek (about 1 mi from Swepsonville). Sites that drain toward Back Creek need silt fence and inlet protection so soil stays out of the water during industrial demolition.
  • Henderson Scott Farm Historic District (about 2 mi from Swepsonville). Around Henderson Scott Farm Historic District, older buildings carry historic value, so we check local district rules before industrial demolition begins.
  • Kerr Scott Farm (about 2 mi from Swepsonville). Kerr Scott Farm is a familiar Swepsonville reference point; homes and businesses around it are part of our industrial demolition area.

Swepsonville landfills and transfer stations for industrial demolition

The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Tri-Corners C&D Landfill in Liberty, about 11 miles from Swepsonville. Clean concrete, brick and stumps have a closer option at Fryar Grading and Hauling LCID Landfill in McLeansville, an LCID landfill about 19 miles away.

Swepsonville rules that apply to industrial demolition

Specialty work in Swepsonville starts with a permit from the Town of Swepsonville or the Alamance County inspections office, plus any engineering or agency approvals the method needs. When a permit is needed, we file it with the Town of Swepsonville or Alamance County’s inspections office, whichever covers your address. 32% of Swepsonville’s homes predate 1980, so asbestos rules from the state Health Hazards Control Unit apply to many jobs here.

We follow the requirements of NC DEQ: Brownfields Program, EPA: Polychlorinated biphenyls (PCBs), EPA: Brownfields and OSHA: Demolition safety on every Swepsonville job.

Swepsonville weather and industrial demolition scheduling

Sitting near 525 feet, Swepsonville has Piedmont weather: steamy summers, pop-up storms and occasional winter ice. For industrial demolition in Swepsonville, aim for October and November: firm ground and comfortable working days. Avoid July and August if you can, given heat that limits crew hours and afternoon storms that turn bare clay to mud.

Storm history matters in Alamance County: the December 2002 ice storm coated the central Piedmont in ice, bringing down trees and power lines and leaving well over a million homes without power.

Industrial Demolition near Swepsonville: map

Get a free industrial demolition quote in Swepsonville

SWEPSONVILLE · ALAMANCE COUNTY

Need industrial demolition in Swepsonville?

Tell us about the Swepsonville property and we will set up a free visit.

LIVE · NATIONAL WEATHER SERVICE

Industrial Demolition weather outlook for Swepsonville this week

How the next seven days in Swepsonville, Alamance County affect industrial demolition, from the official National Weather Service forecast.

Loading the latest forecast for Swepsonville…

READY TO CLEAR THE SITE?

Tell us about your industrial demolition project in Swepsonville.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Industrial Demolition in Swepsonville: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Do I need a permit for industrial demolition in Swepsonville?

Specialty work in Swepsonville starts with a permit from the Town of Swepsonville or the Alamance County inspections office, plus any engineering or agency approvals the method needs.

Where does the debris from Swepsonville jobs go?

The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Tri-Corners C&D Landfill in Liberty, about 11 miles from Swepsonville. Clean concrete, brick and stumps have a closer option at Fryar Grading and Hauling LCID Landfill in McLeansville, an LCID landfill about 19 miles away.

Which season suits industrial demolition in Swepsonville best?

In Swepsonville, at about 525 feet, October and November tends to work best because of firm ground and comfortable working days; July and August bring heat that limits crew hours and afternoon storms that turn bare clay to mud.

Is the area around Henderson Scott Farm Historic District in your Swepsonville coverage?

Yes. Properties in the area around Henderson Scott Farm Historic District are within our Swepsonville service area. Where a site is close to a historic or busy location, we plan protection and hauling around it.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp