GRAHAM · ALAMANCE COUNTY · NC

Industrial Demolition in Graham, NC

Local industrial demolition for Graham, a city of about 19,311: we visit, quote a fixed price and handle the work end to end.

Service areaGraham & Alamance County
PopulationAbout 19,311 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free industrial demolition quote in Graham

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Graham industrial demolition, start to finish

Graham added 12.5% to its population from 2020 to 2024.

Our industrial demolition page explains the work in general; below is what changes in Graham.

QUICK ANSWERS

Industrial Demolition permit
Required; we file it with the City of Graham or county
Best months
October and November
New homes permitted, 2024
517
Population
About 19,311 (2024 est.)
Region
Piedmont

What Graham’s homes tell us about industrial demolition

Housing in Graham breaks down as 64% detached houses, 20% apartments and condos, 5% mobile homes. Expect industrial demolition in Graham to range from small lots to multi-unit properties (American Community Survey).

With 16% of housing built after 2010, Graham is mostly built out, and industrial demolition work reflects that.

Who needs industrial demolition in Graham

From 17,162 people in 2020, Graham reached about 19,311 by mid-2024 according to the U.S. Census Bureau, growth of 12.5%, ahead of the statewide 5.8%.

Here, demand for industrial demolition comes mostly from redevelopment of older industrial, civil and specialty structures.

What Graham’s soil means for industrial demolition

Across Graham, the most common soil in the USDA soil survey is the Enon series (4 of nine sample points). It is well drained and slow to absorb rain (hydrologic group C), on mapped slopes of 2–10%. The seasonal water table can rise to about 2 feet below the surface and the survey rates the ground “somewhat limited” for homes with basements.

Because Graham’s soil absorbs rain slowly, bare ground after industrial demolition is graded to drain and stabilized quickly. A water table near 2 feet means industrial demolition in Graham is easiest in dry weather, with dewatering ready for a wet spell.

Graham brownfields and what they mean for industrial demolition

The NC Brownfields Program lists 7 sites in the Graham area, including Town of Swepsonville, Woody Drive and Virginia Mills II.

A Brownfields Agreement with NC DEQ can restrict digging, soil handling and future use; on these Graham sites, industrial demolition starts with those restrictions.

Graham and nearby towns for industrial demolition

About 5 miles from Burlington, Graham is part of our Alamance County service area for industrial demolition.

At roughly 653 feet of elevation, Graham has its own character; see Graham on Wikipedia.

Check the City of Graham website and the Alamance County website for Graham’s current fees and permit desks.

Other Alamance County communities we serve for industrial demolition: Mebane and Elon.

Close to Graham, the same industrial demolition service covers Swepsonville, Haw River, Burlington and Green Level.

Industrial Demolition near Graham landmarks

  • Alamance Community College. Busy destinations like Alamance Community College bring traffic, so we plan hauling routes and times for industrial demolition to stay out of the way.
  • Graham Historic District. Properties in the area around Graham Historic District can fall under historic review, which adds a step before industrial demolition.
  • North Main Street Historic District. North Main Street Historic District is a familiar Graham reference point; homes and businesses around it are part of our industrial demolition area.

Where debris from industrial demolition in Graham goes

For Graham, the closest permitted construction and demolition landfill is Tri-Corners C&D Landfill in Liberty (Alamance County), roughly 11 miles away, per the NC DEQ Solid Waste Section. Inert debris such as concrete and brick can also go to Fryar Grading and Hauling LCID Landfill in McLeansville, a permitted LCID landfill roughly 17 miles from Graham.

Graham rules that apply to industrial demolition

Specialty work in Graham starts with a permit from the City of Graham or the Alamance County inspections office, plus any engineering or agency approvals the method needs. We confirm whether the City of Graham or Alamance County handles your Graham address, then file the permit there. Asbestos rules for Graham are set by the state Health Hazards Control Unit. The state asks for demolition notices at least 10 working days before work starts and strongly recommends an asbestos inspection for every building, including single-family homes.

NC DEQ: Brownfields Program, EPA: Polychlorinated biphenyls (PCBs), EPA: Brownfields and OSHA: Demolition safety set the standards we work to in Graham.

When to book industrial demolition in Graham

At about 653 feet above sea level, Graham sees warm, wet summers and mild winters, with ice storms a few times a decade. Most Graham customers book industrial demolition for October and November. July and August bring peak heat plus storms that leave clay sites too wet to work.

For Graham, the regional storm record includes this: the December 2002 ice storm coated the central Piedmont in ice, bringing down trees and power lines and leaving well over a million homes without power.

Map of our Graham industrial demolition area

Book industrial demolition in Graham

GRAHAM · ALAMANCE COUNTY

Need industrial demolition in Graham?

Get a fixed industrial demolition price for your Graham property after a free visit.

LIVE · NATIONAL WEATHER SERVICE

Industrial Demolition weather outlook for Graham this week

How the next seven days in Graham, Alamance County affect industrial demolition, from the official National Weather Service forecast.

Loading the latest forecast for Graham…

READY TO CLEAR THE SITE?

Tell us about your industrial demolition project in Graham.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Industrial Demolition in Graham: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Who issues permits for industrial demolition in Graham?

Specialty work in Graham starts with a permit from the City of Graham or the Alamance County inspections office, plus any engineering or agency approvals the method needs.

How does Graham’s ground affect industrial demolition?

The USDA soil survey shows mostly Enon soils, well drained and a seasonal water table that can rise to about 2 feet.

What month should I book industrial demolition in Graham?

In Graham, at about 653 feet, October and November tends to work best because of mild weather and dry clay that holds equipment; July and August bring peak heat plus storms that leave clay sites too wet to work.

Where does the debris from Graham jobs go?

For Graham, the closest permitted construction and demolition landfill is Tri-Corners C&D Landfill in Liberty (Alamance County), roughly 11 miles away, per the NC DEQ Solid Waste Section. Inert debris such as concrete and brick can also go to Fryar Grading and Hauling LCID Landfill in McLeansville, a permitted LCID landfill roughly 17 miles from Graham.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp