ALAMANCE · ALAMANCE COUNTY · NC

Land Grading in Alamance, NC

Land Grading in Alamance and across Alamance County, with a free site visit, a fixed quote and one crew from start to finish.

Service areaAlamance & Alamance County
PopulationAbout 1,043 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free land grading quote in Alamance

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Alamance land grading, start to finish

Burlington is 4 miles from Alamance, and we cover both.

Everything the service includes is set out on our main land grading page; this page covers what is specific to Alamance.

QUICK ANSWERS

Land Grading permit
Needed for an acre or more; we check and file
Nearest large city
Burlington, about 4 miles
Typical home built
2002 (35% before 1980)
Median home value
$405,000
Best months
October and November

Alamance housing and what it means for land grading

New construction is a modest part of Alamance: 19% of homes date from 2010 or later, so land grading demand follows redevelopment of existing lots (American Community Survey).

Housing in Alamance breaks down as 98% detached houses. In a town of single-family lots like Alamance, land grading usually happens with a driveway and yard to protect.

Alamance’s growth and demand for land grading

U.S. Census Bureau figures show Alamance going from 990 residents (2020) to 1,043 (2024), steady growth of 5.4%.

Here, demand for land grading comes mostly from new homes and developments that need land cleared, dug and graded.

Soil and ground conditions for land grading in Alamance

Cullen is the soil you are most likely to dig into in Alamance, per the USDA soil survey (6 of nine sampled points). It is well drained and moderately fast-draining (hydrologic group B), on mapped slopes of 2–45%. The seasonal water table can rise to about 2 feet below the surface.

Mapped slopes reach 45% in parts of Alamance, so machine access and erosion control are planned around the grade. With groundwater as close as 2 feet, open holes in Alamance can take on water, so pumping is planned for wet months and fill goes in compacted layers.

Land Grading around Alamance and Alamance County

Our land grading crews cover Alamance and the rest of Alamance County, 4 miles from Burlington.

Alamance dates back to 1837, sits about 561 feet above sea level (Alamance on Wikipedia).

Check the Village of Alamance website and the Alamance County website for Alamance’s current fees and permit desks.

Other Alamance County communities we serve for land grading: Ossipee, Green Level, Saxapahaw, Altamahaw, Mebane and Woodlawn.

We also provide land grading in Burlington, Elon, Whitsett and Graham.

Alamance places that shape our land grading work

  • Alamance Mill Village Historic District (about 1 mi from Alamance). Around Alamance Mill Village Historic District, older buildings carry historic value, so we check local district rules before land grading begins.
  • L. Banks Holt House (about 1 mi from Alamance). Properties in the neighborhoods around L. Banks Holt House are covered by our Alamance land grading service, with access and parking checked at the site visit.
  • Burlington-Alamance Regional Airport (about 2 mi from Alamance). Traffic around Burlington-Alamance Regional Airport shapes our schedule: trucks for land grading are timed around event days, peak hours and road closures nearby.

Where debris from land grading in Alamance goes

Loads of stumps, brush, soil and clean concrete that can’t be recycled can go to an LCID (land-clearing and inert debris) landfill; the closest on the NC DEQ Solid Waste Section permitted list is Fryar Grading and Hauling LCID Landfill in McLeansville, about 12 miles from Alamance. The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Tri-Corners C&D Landfill in Liberty, about 6 miles from Alamance.

Land Grading permits and regulations in Alamance

Land disturbance in Alamance of one acre or more needs an approved plan under the NC DEQ erosion and sediment control program, and the Village of Alamance or the Alamance County inspections office may require a grading permit. We confirm whether the Village of Alamance or Alamance County handles your Alamance address, then file the permit there.

NC DEQ: Erosion and sediment control, NC DEQ: Stormwater program and EPA: Construction stormwater set the standards we work to in Alamance.

When to book land grading in Alamance

Sitting near 561 feet, Alamance gets hot, humid summers with afternoon thunderstorms and short, mild winters broken by the odd ice storm. October and November is usually the best window for land grading here, with cooler days, firmer ground and fewer thunderstorms; July and August are the hardest months.

Alamance County remembers its storms. The December 2002 ice storm coated the central Piedmont in ice, bringing down trees and power lines and leaving well over a million homes without power.

What land grading costs in Alamance

What is specific to pricing land grading in Alamance:

  • What the property is worth. Alamance homes have a median value of about $405,000; that context shapes how much a land grading project makes sense.

Map of our Alamance land grading area

Book land grading in Alamance

ALAMANCE · ALAMANCE COUNTY

Need land grading in Alamance?

One call or message gets a free Alamance site visit and a price with every line spelled out.

LIVE · NATIONAL WEATHER SERVICE

Land Grading weather outlook for Alamance this week

How the next seven days in Alamance, Alamance County affect land grading, from the official National Weather Service forecast.

Loading the latest forecast for Alamance…

READY TO CLEAR THE SITE?

Tell us about your land grading project in Alamance.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Land Grading in Alamance: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Who issues permits for land grading in Alamance?

Land disturbance in Alamance of one acre or more needs an approved plan under the NC DEQ erosion and sediment control program, and the Village of Alamance or the Alamance County inspections office may require a grading permit.

Where does the debris from Alamance jobs go?

Loads of stumps, brush, soil and clean concrete that can’t be recycled can go to an LCID (land-clearing and inert debris) landfill; the closest on the NC DEQ Solid Waste Section permitted list is Fryar Grading and Hauling LCID Landfill in McLeansville, about 12 miles from Alamance. The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Tri-Corners C&D Landfill in Liberty, about 6 miles from Alamance.

Where can I check Alamance permit rules myself?

The Village of Alamance website publishes local ordinances and permit contacts, and Alamance County’s site covers county-level rules.

What will we dig into in Alamance?

The USDA soil survey shows mostly Cullen soils, well drained with rock as shallow as about 2 feet in places and a seasonal water table that can rise to about 2 feet.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp