Land Grading services in Graham, NC
With 12.5% growth since 2020, Graham is outpacing the state.
The general process is on the land grading page; this page is about doing it well in Graham.
QUICK ANSWERS
- Land Grading permit
- Needed for an acre or more; we check and file
- Main soil
- Enon (well drained)
- County
- Alamance County
- Nearest large city
- Burlington, about 5 miles
- Typical home built
- 1984 (46% before 1980)
Land Grading and the Graham housing stock
16% of Graham’s homes were built since 2010, and population moved up 12.5% from 2020 to 2024, which tells you how much new ground is being opened for land grading (American Community Survey).
In Graham, the housing stock is 64% detached houses, 20% apartments and condos, 5% mobile homes. That mix means land grading in Graham ranges from single homes to larger residential buildings.
What drives land grading in Graham
From 17,162 people in 2020, Graham reached about 19,311 by mid-2024 according to the U.S. Census Bureau, growth of 12.5%, ahead of the statewide 5.8%.
The Census Bureau building permits survey counts 517 new single-family homes authorized in Graham in 2024. With that much new construction, Graham has a steady run of lots to clear and grade.
Graham ground conditions and land grading
Enon is the soil you are most likely to dig into in Graham, per the USDA soil survey (4 of nine sampled points). It is well drained and slow to absorb rain (hydrologic group C), on mapped slopes of 2–10%. The seasonal water table can rise to about 2 feet below the surface.
Because Graham’s soil absorbs rain slowly, bare ground after land grading is graded to drain and stabilized quickly. A water table near 2 feet means land grading in Graham is easiest in dry weather, with dewatering ready for a wet spell.
Land Grading around Graham and Alamance County
Graham is a Alamance County community in North Carolina’s Piedmont, about 5 miles from Burlington.
Some background: elevation near 653 feet (Graham on Wikipedia).
For local ordinances and permit contacts, see the City of Graham website and the Alamance County website.
Elsewhere in Alamance County, our land grading pages cover Mebane, Woodlawn, Elon, Saxapahaw, Ossipee and Altamahaw.
Swepsonville, Haw River, Burlington and Green Level are a short drive from Graham and on our land grading schedule too.
Landmarks around Graham and land grading
- Oneida Cotton Mills and Scott-Mebane Manufacturing Company Complex. Oneida Cotton Mills and Scott-Mebane Manufacturing Company Complex is a reminder of Graham’s working past; on older sites nearby, sorting brick, timber and metal for reuse is part of land grading.
- Alamance Community College. Traffic around Alamance Community College shapes our schedule: trucks for land grading are timed around event days, peak hours and road closures nearby.
- Graham Historic District. Properties in the area around Graham Historic District can fall under historic review, which adds a step before land grading.
Graham landfills and transfer stations for land grading
For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Fryar Grading and Hauling LCID Landfill in McLeansville (Guilford County), roughly 17 miles from Graham, per the NC DEQ Solid Waste Section. For Graham, the closest permitted construction and demolition landfill is Tri-Corners C&D Landfill in Liberty (Alamance County), roughly 11 miles away, per the NC DEQ Solid Waste Section.
Land Grading permits and regulations in Graham
In Graham, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the City of Graham or the Alamance County inspections office may also want a grading permit. When a permit is needed, we file it with the City of Graham or Alamance County’s inspections office, whichever covers your address.
Agencies whose rules apply to this work in Alamance County: NC DEQ: Erosion and sediment control, NC DEQ: Stormwater program and EPA: Construction stormwater.
Graham weather and land grading scheduling
Graham, around 653 feet up, gets hot, humid summers with afternoon thunderstorms and short, mild winters broken by the odd ice storm. October and November is usually the best window for land grading here, with firm ground and comfortable working days; July and August are the hardest months.
Storm history matters in Alamance County: the December 2002 ice storm coated the central Piedmont in ice, bringing down trees and power lines and leaving well over a million homes without power.
Pricing land grading in Graham
Beyond size, materials and access, these Graham factors affect the price:
- Local property values. With a median home value near $201,000 in Graham, owners usually weigh the project against resale value, so we keep every line of the quote visible.
Map of our Graham land grading area
Book land grading in Graham
GRAHAM · ALAMANCE COUNTY
Need land grading in Graham?
Tell us about the Graham property and we will set up a free visit.