BURLINGTON · ALAMANCE COUNTY · NC

Land Grading in Burlington, NC

Local land grading for Burlington, a city of about 61,365: we visit, quote a fixed price and handle the work end to end.

Service areaBurlington & Alamance County
PopulationAbout 61,365 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free land grading quote in Burlington

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Land Grading services in Burlington, NC

Greensboro is 20 miles from Burlington, and we cover both. Part of Burlington lies in Guilford County.

Our land grading page explains the work in general; below is what changes in Burlington.

QUICK ANSWERS

Land Grading permit
Needed for an acre or more; we check and file
Main soil
Helena (well drained)
County
Alamance County
Nearest large city
Greensboro, about 20 miles
Typical home built
1977 (54% before 1980)

What Burlington’s homes tell us about land grading

With 10% of housing built after 2010, Burlington is mostly built out, and land grading work reflects that (American Community Survey).

In Burlington, the housing stock is 59% detached houses, 22% apartments and condos, 4% mobile homes. Expect land grading in Burlington to range from small lots to multi-unit properties.

Who needs land grading in Burlington

Burlington had 57,369 residents at the 2020 baseline, and the U.S. Census Bureau estimates 61,365 by July 2024, steady growth of 7.0%.

Builders pulled permits for 347 new homes and apartments in Burlington in 2024, 261 of them single-family, per the Census Bureau building permits survey.

What Burlington’s soil means for land grading

Across Burlington, the most common soil in the USDA soil survey is the Helena series (3 of nine sample points). It is well drained and slow to absorb rain (hydrologic group C), on mapped slopes of 0–25%. The seasonal water table can rise to about 2 feet below the surface.

Because Burlington’s soil absorbs rain slowly, bare ground after land grading is graded to drain and stabilized quickly. With slopes up to 25% in places, Burlington jobs on the grade use smaller machines and stabilize soil quickly.

Burlington and nearby towns for land grading

About 20 miles from Greensboro, Burlington is part of our Alamance County service area for land grading.

At roughly 633 feet of elevation, Burlington, established in 1886, has its own character; see Burlington on Wikipedia.

For local ordinances and permit contacts, see the City of Burlington website and the Alamance County website.

Land Grading is also available in Swepsonville, Green Level, Altamahaw, Woodlawn, Mebane and Saxapahaw, all in Alamance County.

Close to Burlington, the same land grading service covers Elon, Glen Raven, Alamance and Gibsonville.

Land Grading near Burlington landmarks

  • Beverly Hills Historic District. Work close to Beverly Hills Historic District has to respect historic character. If a property sits inside a local historic district, land grading may need a Certificate of Appropriateness before anything is removed.
  • Efird Building. The streets near Efird Building are part of our Burlington service area for land grading.

Permitted disposal sites for land grading near Burlington

For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Fryar Grading and Hauling LCID Landfill in McLeansville (Guilford County), roughly 12 miles from Burlington, per the NC DEQ Solid Waste Section. The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Tri-Corners C&D Landfill in Liberty, about 9 miles from Burlington.

Permits and rules for land grading in Burlington

In Burlington, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the City of Burlington or the Alamance County inspections office may also want a grading permit. The City of Burlington or Alamance County inspections office issues the permit, and we handle the application for your Burlington property.

Agencies whose rules apply to this work in Alamance County: NC DEQ: Erosion and sediment control, NC DEQ: Stormwater program and EPA: Construction stormwater.

Best time for land grading in Burlington

At about 633 feet above sea level, Burlington sees warm, wet summers and mild winters, with ice storms a few times a decade. For land grading in Burlington, aim for October and November: mild weather and dry clay that holds equipment. Avoid July and August if you can, given heat stress and muddy ground after thunderstorms.

For Burlington, the regional storm record includes this: the December 2002 ice storm coated the central Piedmont in ice, bringing down trees and power lines and leaving well over a million homes without power.

Burlington land grading pricing factors

On top of the usual factors, a Burlington quote reflects:

  • Burlington home values. The typical Burlington home is valued near $189,000, a useful yardstick when deciding whether land grading pays off at sale or rebuild.

Map of our Burlington land grading area

Book land grading in Burlington

BURLINGTON · ALAMANCE COUNTY

Need land grading in Burlington?

Get a fixed land grading price for your Burlington property after a free visit.

LIVE · NATIONAL WEATHER SERVICE

Land Grading weather outlook for Burlington this week

How the next seven days in Burlington, Alamance County affect land grading, from the official National Weather Service forecast.

Loading the latest forecast for Burlington…

READY TO CLEAR THE SITE?

Tell us about your land grading project in Burlington.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Land Grading in Burlington: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Is a permit required for land grading in Burlington?

In Burlington, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the City of Burlington or the Alamance County inspections office may also want a grading permit.

Where can I check Burlington permit rules myself?

The City of Burlington website publishes local ordinances and permit contacts, and Alamance County’s site covers county-level rules.

What month should I book land grading in Burlington?

In Burlington, at about 633 feet, October and November tends to work best because of mild weather and dry clay that holds equipment; July and August bring heat stress and muddy ground after thunderstorms.

Where does the debris from Burlington jobs go?

For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Fryar Grading and Hauling LCID Landfill in McLeansville (Guilford County), roughly 12 miles from Burlington, per the NC DEQ Solid Waste Section. The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Tri-Corners C&D Landfill in Liberty, about 9 miles from Burlington.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp