ALAMANCE · ALAMANCE COUNTY · NC

Industrial Demolition in Alamance, NC

Industrial Demolition for Alamance properties, priced after a free visit and carried out by one Alamance County crew.

Service areaAlamance & Alamance County
PopulationAbout 1,043 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free industrial demolition quote in Alamance

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Industrial Demolition services in Alamance, NC

Our industrial demolition crews reach Alamance as part of the wider Burlington area, 4 miles away.

For the full scope of the service, see our industrial demolition page. Here we focus on Alamance: its housing, rules, ground and weather.

QUICK ANSWERS

Industrial Demolition permit
Required; we file it with the Village of Alamance or county
Main soil
Cullen (well drained)
Population
About 1,043 (2024 est.)
Region
Piedmont
Owner-occupied homes
85%

Industrial Demolition and the Alamance housing stock

In Alamance, the housing stock is 98% detached houses. Most Alamance industrial demolition jobs are on private single-family lots (American Community Survey).

19% of Alamance’s homes were built since 2010, and population moved up 5.4% from 2020 to 2024, which tells you how much new ground is being opened for industrial demolition.

Alamance at a glance for industrial demolition

U.S. Census Bureau figures show Alamance going from 990 residents (2020) to 1,043 (2024), steady growth of 5.4%.

Redevelopment of older industrial, civil and specialty structures: that is where most Alamance industrial demolition calls come from.

Alamance ground conditions and industrial demolition

Cullen is the soil you are most likely to dig into in Alamance, per the USDA soil survey (6 of nine sampled points). It is well drained and moderately fast-draining (hydrologic group B), on mapped slopes of 2–45%. Bedrock can sit as shallow as about 2 feet, the seasonal water table can rise to about 2 feet below the surface and the survey rates the ground “somewhat limited” for homes with basements.

Digs below about 2 feet in Alamance can hit rock, so deep footings, basements and trenches may need a hydraulic breaker. With groundwater as close as 2 feet, open holes in Alamance can take on water, so pumping is planned for wet months and fill goes in compacted layers.

Alamance and nearby towns for industrial demolition

Alamance is a Alamance County community in North Carolina’s Piedmont, about 4 miles from Burlington.

According to Alamance on Wikipedia, Alamance was founded in 1837 and stands about 561 feet up.

For local ordinances and permit contacts, see the Village of Alamance website and the Alamance County website.

Neighbors of Alamance we serve: Burlington, Elon, Whitsett and Graham.

Landmarks around Alamance and industrial demolition

  • Allen House (about 2 mi from Alamance). Properties in the neighborhoods around Allen House are covered by our Alamance industrial demolition service, with access and parking checked at the site visit.
  • Burlington-Alamance Regional Airport (about 2 mi from Alamance). Busy destinations like Burlington-Alamance Regional Airport bring traffic, so we plan hauling routes and times for industrial demolition to stay out of the way.
  • Alamance Mill Village Historic District (about 1 mi from Alamance). Around Alamance Mill Village Historic District, older buildings carry historic value, so we check local district rules before industrial demolition begins.

Permitted disposal sites for industrial demolition near Alamance

Mixed demolition debris from Alamance can go to Tri-Corners C&D Landfill in Liberty, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 6 miles off. Inert debris such as concrete and brick can also go to Fryar Grading and Hauling LCID Landfill in McLeansville, a permitted LCID landfill roughly 12 miles from Alamance.

Permits and rules for industrial demolition in Alamance

Large and specialty demolition in Alamance needs a demolition permit from the Village of Alamance or the Alamance County inspections office, and often engineering review and specialist permits too. The Village of Alamance or Alamance County inspections office issues the permit, and we handle the application for your Alamance property. For Alamance properties, the state Health Hazards Control Unit handles asbestos notices, and we file what is required before work starts.

Agencies whose rules apply to this work in Alamance County: NC DEQ: Brownfields Program, EPA: Polychlorinated biphenyls (PCBs), EPA: Brownfields and OSHA: Demolition safety.

Best time for industrial demolition in Alamance

Alamance, around 561 feet up, has Piedmont weather: steamy summers, pop-up storms and occasional winter ice. October and November is usually the best window for industrial demolition here, with steady temperatures and fewer afternoon storms; July and August are the hardest months.

In December 2002 an ice storm left well over a million Piedmont homes without power as trees and lines came down, a reminder for property owners across Alamance County of how storms create demolition and clean-up work.

Map of our Alamance industrial demolition area

Book industrial demolition in Alamance

ALAMANCE · ALAMANCE COUNTY

Need industrial demolition in Alamance?

Send your Alamance address for a free site visit and a fixed, itemized quote.

LIVE · NATIONAL WEATHER SERVICE

Industrial Demolition weather outlook for Alamance this week

How the next seven days in Alamance, Alamance County affect industrial demolition, from the official National Weather Service forecast.

Loading the latest forecast for Alamance…

READY TO CLEAR THE SITE?

Tell us about your industrial demolition project in Alamance.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Industrial Demolition in Alamance: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Is a permit required for industrial demolition in Alamance?

Large and specialty demolition in Alamance needs a demolition permit from the Village of Alamance or the Alamance County inspections office, and often engineering review and specialist permits too.

What is the soil like in Alamance?

The USDA soil survey shows mostly Cullen soils, well drained with rock as shallow as about 2 feet in places and a seasonal water table that can rise to about 2 feet.

Where does the debris from Alamance jobs go?

Mixed demolition debris from Alamance can go to Tri-Corners C&D Landfill in Liberty, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 6 miles off. Inert debris such as concrete and brick can also go to Fryar Grading and Hauling LCID Landfill in McLeansville, a permitted LCID landfill roughly 12 miles from Alamance.

Are older homes in Alamance likely to contain asbestos?

Census estimates put the median Alamance home at 2002, with 35% built before 1980 and 19% before 1940. Asbestos was common in homes of that era, so many Alamance jobs need testing under the state Health Hazards Control Unit's rules before work starts.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp