GRAHAM · ALAMANCE COUNTY · NC

Excavation, Grading & Restoration in Graham, NC

Local excavation, grading & restoration for Graham, a city of about 19,311: we visit, quote a fixed price and handle the work end to end.

Service areaGraham & Alamance County
PopulationAbout 19,311 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free excavation, grading & restoration quote in Graham

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Graham excavation, grading & restoration, start to finish

Graham grew about 12.5% between 2020 and 2024, faster than North Carolina as a whole.

Our excavation, grading & restoration page explains the work in general; below is what changes in Graham.

Services in this group available in Graham: Fire & Water Restoration, Environmental Remediation, Excavation, Land Grading and Furniture Removal.

QUICK ANSWERS

Excavation & Grading permit
Needed for an acre or more; we check and file
Owner-occupied homes
52%
Elevation
About 653 ft
Main soil
Enon (well drained)
County
Alamance County

Excavation, Grading & Restoration and the Graham housing stock

New construction is a modest part of Graham: 16% of homes date from 2010 or later, so excavation, grading & restoration demand follows redevelopment of existing lots (American Community Survey).

Housing in Graham breaks down as 64% detached houses, 20% apartments and condos, 5% mobile homes. Because Graham has a real mix of housing, excavation, grading & restoration jobs vary widely in size and access.

Who needs excavation, grading & restoration in Graham

Graham had 17,162 residents at the 2020 baseline, and the U.S. Census Bureau estimates 19,311 by July 2024, growth of 12.5%, ahead of the statewide 5.8%.

Builders pulled permits for 517 new homes and apartments in Graham in 2024, 517 of them single-family, per the Census Bureau building permits survey. With that much new construction, Graham has a steady run of lots to clear and grade.

Graham ground conditions and excavation, grading & restoration

The USDA soil survey maps Enon soils at 4 of nine points we checked across Graham. They are well drained and slow to absorb rain (hydrologic group C), on mapped slopes of 2–10%.

Because Graham’s soil absorbs rain slowly, bare ground after excavation, grading & restoration is graded to drain and stabilized quickly.

Graham and nearby towns for excavation, grading & restoration

About 5 miles from Burlington, Graham is part of our Alamance County service area for excavation, grading & restoration.

At roughly 653 feet of elevation, Graham has its own character; see Graham on Wikipedia.

Check the City of Graham website and the Alamance County website for Graham’s current fees and permit desks.

Other Alamance County communities we serve for excavation, grading & restoration: Ossipee, Altamahaw, Alamance, Glen Raven, Mebane and Woodlawn.

Close to Graham, the same excavation, grading & restoration service covers Swepsonville, Haw River, Burlington and Green Level.

Landmarks around Graham and excavation, grading & restoration

  • Oneida Cotton Mills and Scott-Mebane Manufacturing Company Complex. Oneida Cotton Mills and Scott-Mebane Manufacturing Company Complex is a reminder of Graham’s working past; on older sites nearby, sorting brick, timber and metal for reuse is part of excavation, grading & restoration.
  • Alamance Community College. Busy destinations like Alamance Community College bring traffic, so we plan hauling routes and times for excavation, grading & restoration to stay out of the way.
  • Graham Historic District. Properties in the area around Graham Historic District can fall under historic review, which adds a step before excavation, grading & restoration.

Permitted disposal sites for excavation, grading & restoration near Graham

For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Fryar Grading and Hauling LCID Landfill in McLeansville (Guilford County), roughly 17 miles from Graham, per the NC DEQ Solid Waste Section. The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Tri-Corners C&D Landfill in Liberty, about 11 miles from Graham.

Permits and rules for excavation, grading & restoration in Graham

In Graham, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the City of Graham or the Alamance County inspections office may also want a grading permit. When a permit is needed, we file it with the City of Graham or Alamance County’s inspections office, whichever covers your address.

NC 811, NC DEQ: Erosion and sediment control, NC DEQ: Brownfields Program and EPA: Mold set the standards we work to in Graham.

Graham weather and excavation, grading & restoration scheduling

At about 653 feet above sea level, Graham gets hot, humid summers with afternoon thunderstorms and short, mild winters broken by the odd ice storm. For excavation, grading & restoration in Graham, aim for October and November: mild weather and dry clay that holds equipment. Avoid July and August if you can, given peak heat plus storms that leave clay sites too wet to work.

For Graham, the regional storm record includes this: in December 2002 an ice storm left well over a million Piedmont homes without power as trees and lines came down.

Graham excavation, grading & restoration pricing factors

What is specific to pricing excavation, grading & restoration in Graham:

  • What the property is worth. Graham homes have a median value of about $201,000; that context shapes how much a excavation, grading & restoration project makes sense.

Map of our Graham excavation, grading & restoration area

Book excavation, grading & restoration in Graham

GRAHAM · ALAMANCE COUNTY

Need excavation, grading & restoration in Graham?

Get a fixed excavation, grading & restoration price for your Graham property after a free visit.

LIVE · NATIONAL WEATHER SERVICE

Excavation, Grading & Restoration weather outlook for Graham this week

How the next seven days in Graham, Alamance County affect excavation, grading & restoration, from the official National Weather Service forecast.

Loading the latest forecast for Graham…

READY TO CLEAR THE SITE?

Tell us about your excavation, grading & restoration project in Graham.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Excavation, Grading & Restoration in Graham: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Who issues permits for excavation, grading & restoration in Graham?

In Graham, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the City of Graham or the Alamance County inspections office may also want a grading permit.

Where can I check Graham permit rules myself?

The City of Graham website publishes local ordinances and permit contacts, and Alamance County’s site covers county-level rules.

What is the soil like in Graham?

The USDA soil survey shows mostly Enon soils, well drained and a seasonal water table that can rise to about 2 feet.

Where does the debris from Graham jobs go?

For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Fryar Grading and Hauling LCID Landfill in McLeansville (Guilford County), roughly 17 miles from Graham, per the NC DEQ Solid Waste Section. The nearest active C&D landfill on the NC DEQ Solid Waste Section permitted list is Tri-Corners C&D Landfill in Liberty, about 11 miles from Graham.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp