GRAHAM · ALAMANCE COUNTY · NC

Historical & Architectural Demolition in Graham, NC

Historical & Architectural Demolition in Graham and across Alamance County, with a free site visit, a fixed quote and one crew from start to finish.

Service areaGraham & Alamance County
PopulationAbout 19,311 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free historical & architectural demolition quote in Graham

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Historical & Architectural Demolition in Graham

Graham grew about 12.5% between 2020 and 2024, faster than North Carolina as a whole.

Everything the service includes is set out on our main historical & architectural demolition page; this page covers what is specific to Graham.

QUICK ANSWERS

Historic Demolition permit
Required; we file it with the City of Graham or county
Region
Piedmont
Owner-occupied homes
52%
Elevation
About 653 ft
Main soil
Enon (well drained)

Graham housing and what it means for historical & architectural demolition

Of Graham’s roughly 8,516 homes, 46% were built before 1980 and the median dates from 1984, older than the Alamance County median of 1987 (American Community Survey). In practice, older materials like asbestos siding, floor tile and lead paint are a real possibility in Graham, so we test before any teardown.

The median Graham home is worth about $201,000, in line with Alamance County.

Graham’s growth and demand for historical & architectural demolition

U.S. Census Bureau figures show Graham going from 17,162 residents (2020) to 19,311 (2024), growth of 12.5%, ahead of the statewide 5.8%.

In 2024, 517 new housing units were authorized in Graham (517 of them single-family), according to the Census Bureau building permits survey. Building at that pace means more lots being redone, including older structures that come down first.

Graham and nearby towns for historical & architectural demolition

Graham sits in Alamance County, about 5 miles from Burlington, in the Piedmont, where the ground is red clay that turns slick after rain. That affects how we stage equipment and protect the site.

Graham sits about 653 feet above sea level (Graham on Wikipedia).

Local permit offices, fee schedules and notices are published on the City of Graham website and the Alamance County website.

Elsewhere in Alamance County, our historical & architectural demolition pages cover Alamance, Mebane, Elon, Saxapahaw and Altamahaw.

We also provide historical & architectural demolition in Swepsonville, Haw River, Burlington and Green Level.

Graham places that shape our historical & architectural demolition work

  • Graham Historic District. Properties in the area around Graham Historic District can fall under historic review, which adds a step before historical & architectural demolition.
  • North Main Street Historic District. The streets near North Main Street Historic District are part of our Graham service area for historical & architectural demolition.
  • Oneida Cotton Mills and Scott-Mebane Manufacturing Company Complex. Older industrial sites such as Oneida Cotton Mills and Scott-Mebane Manufacturing Company Complex are where careful dismantling pays off, with materials kept for reuse during historical & architectural demolition.

Permitted disposal sites for historical & architectural demolition near Graham

Mixed demolition debris from Graham can go to Tri-Corners C&D Landfill in Liberty, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 11 miles off. Clean concrete, brick and stumps have a closer option at Fryar Grading and Hauling LCID Landfill in McLeansville, an LCID landfill about 17 miles away.

Permits and rules for historical & architectural demolition in Graham

Before historical & architectural demolition starts in Graham, the City of Graham or the Alamance County inspections office must approve a demolition permit. When a permit is needed, we file it with the City of Graham or Alamance County’s inspections office, whichever covers your address. Asbestos rules for Graham are set by the state Health Hazards Control Unit. The state asks for demolition notices at least 10 working days before work starts and strongly recommends an asbestos inspection for every building, including single-family homes.

For historical & architectural demolition in Graham, the rules come from NC State Historic Preservation Office, National Park Service: National Register of Historic Places, EPA: Lead Renovation, Repair and Painting and EPA: Asbestos NESHAP.

When to book historical & architectural demolition in Graham

Sitting near 653 feet, Graham gets hot, humid summers with afternoon thunderstorms and short, mild winters broken by the odd ice storm. For historical & architectural demolition in Graham, aim for October and November: cooler days, firmer ground and fewer thunderstorms. Avoid July and August if you can, given humid afternoons and downpours that stall grading.

Alamance County remembers its storms. The ice storm of December 2002 brought down trees and power lines across the central Piedmont.

Graham historical & architectural demolition pricing factors

What is specific to pricing historical & architectural demolition in Graham:

  • Graham home values. The typical Graham home is valued near $201,000, a useful yardstick when deciding whether historical & architectural demolition pays off at sale or rebuild.

Historical & Architectural Demolition near Graham: map

Get a free historical & architectural demolition quote in Graham

GRAHAM · ALAMANCE COUNTY

Need historical & architectural demolition in Graham?

One call or message gets a free Graham site visit and a price with every line spelled out.

LIVE · NATIONAL WEATHER SERVICE

Historical & Architectural Demolition weather outlook for Graham this week

How the next seven days in Graham, Alamance County affect historical & architectural demolition, from the official National Weather Service forecast.

Loading the latest forecast for Graham…

READY TO CLEAR THE SITE?

Tell us about your historical & architectural demolition project in Graham.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Historical & Architectural Demolition in Graham: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
What permits does historical & architectural demolition need in Graham?

Before historical & architectural demolition starts in Graham, the City of Graham or the Alamance County inspections office must approve a demolition permit.

Where does the debris from Graham jobs go?

Mixed demolition debris from Graham can go to Tri-Corners C&D Landfill in Liberty, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 11 miles off. Clean concrete, brick and stumps have a closer option at Fryar Grading and Hauling LCID Landfill in McLeansville, an LCID landfill about 17 miles away.

Where can I check Graham permit rules myself?

The City of Graham website publishes local ordinances and permit contacts, and Alamance County’s site covers county-level rules.

When is the best time of year for historical & architectural demolition in Graham?

Usually October and November, with cooler days, firmer ground and fewer thunderstorms. July and August are the hardest in Graham, with humid afternoons and downpours that stall grading.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp