GRAHAM · ALAMANCE COUNTY · NC

Driveway Removal in Graham, NC

Local driveway removal for Graham, a city of about 19,311: we visit, quote a fixed price and handle the work end to end.

Service areaGraham & Alamance County
PopulationAbout 19,311 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free driveway removal quote in Graham

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Graham driveway removal, start to finish

Graham added 12.5% to its population from 2020 to 2024.

Our driveway removal page explains the work in general; below is what changes in Graham.

QUICK ANSWERS

Driveway Removal permit
Usually not needed; we confirm for your address
Region
Piedmont
Owner-occupied homes
52%
Elevation
About 653 ft
Main soil
Enon (well drained)

Graham housing and what it means for driveway removal

1984 is the median build year in Graham, older than the Alamance County median of 1987, per the American Community Survey, and 46% of homes predate 1980: a lot of the concrete around Graham homes is decades old and failing.

New construction is a modest part of Graham: 16% of homes date from 2010 or later, so driveway removal demand follows redevelopment of existing lots.

Who needs driveway removal in Graham

From 17,162 people in 2020, Graham reached about 19,311 by mid-2024 according to the U.S. Census Bureau, growth of 12.5%, ahead of the statewide 5.8%.

The Census Bureau building permits survey counts 517 new single-family homes authorized in Graham in 2024. With that much building, old concrete often comes out when Graham lots are redeveloped.

What Graham’s soil means for driveway removal

Across Graham, the most common soil in the USDA soil survey is the Enon series (4 of nine sample points). It is well drained and slow to absorb rain (hydrologic group C), on mapped slopes of 2–10%.

Because Graham’s soil absorbs rain slowly, bare ground after driveway removal is graded to drain and stabilized quickly.

Where we provide driveway removal near Graham

Graham is a Alamance County community in North Carolina’s Piedmont, about 5 miles from Burlington.

At roughly 653 feet of elevation, Graham has its own character; see Graham on Wikipedia.

Check the City of Graham website and the Alamance County website for Graham’s current fees and permit desks.

Driveway Removal is also available in Altamahaw, Alamance, Glen Raven, Mebane, Woodlawn and Elon, all in Alamance County.

Close to Graham, the same driveway removal service covers Swepsonville, Haw River, Burlington and Green Level.

Landmarks around Graham and driveway removal

  • Alamance Community College. With visitors heading to Alamance Community College, we keep trucks off the busiest roads and times while driveway removal is underway.
  • Graham Historic District. Work close to Graham Historic District has to respect historic character. If a property sits inside a local historic district, driveway removal may need a Certificate of Appropriateness before anything is removed.
  • North Main Street Historic District. North Main Street Historic District is a familiar Graham reference point; homes and businesses around it are part of our driveway removal area.

Where debris from driveway removal in Graham goes

For clean concrete, brick and block, the nearest permitted LCID landfill is Fryar Grading and Hauling LCID Landfill in McLeansville (Guilford County), roughly 17 miles from Graham, per the NC DEQ Solid Waste Section. Mixed demolition debris from Graham can go to Tri-Corners C&D Landfill in Liberty, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 11 miles off.

Driveway Removal permits and regulations in Graham

Most Graham concrete removal needs no demolition permit; work touching the street, a curb cut or a state road is the exception and may need City of Graham or NCDOT approval.

OSHA: Respirable crystalline silica and EPA: Construction stormwater set the standards we work to in Graham.

Best time for driveway removal in Graham

Graham, around 653 feet up, sees warm, wet summers and mild winters, with ice storms a few times a decade. For driveway removal in Graham, aim for October and November: mild weather and dry clay that holds equipment. Avoid July and August if you can, given peak heat plus storms that leave clay sites too wet to work.

For Graham, the regional storm record includes this: in December 2002 an ice storm left well over a million Piedmont homes without power as trees and lines came down.

What driveway removal costs in Graham

Beyond size, materials and access, these Graham factors affect the price:

  • Local property values. With a median home value near $201,000 in Graham, owners usually weigh the project against resale value, so we keep every line of the quote visible.

Map of our Graham driveway removal area

Book driveway removal in Graham

GRAHAM · ALAMANCE COUNTY

Need driveway removal in Graham?

Get a fixed driveway removal price for your Graham property after a free visit.

LIVE · NATIONAL WEATHER SERVICE

Driveway Removal weather outlook for Graham this week

How the next seven days in Graham, Alamance County affect driveway removal, from the official National Weather Service forecast.

Loading the latest forecast for Graham…

READY TO CLEAR THE SITE?

Tell us about your driveway removal project in Graham.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Driveway Removal in Graham: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Who issues permits for driveway removal in Graham?

Most Graham concrete removal needs no demolition permit; work touching the street, a curb cut or a state road is the exception and may need City of Graham or NCDOT approval.

What month should I book driveway removal in Graham?

In Graham, at about 653 feet, October and November tends to work best because of mild weather and dry clay that holds equipment; July and August bring peak heat plus storms that leave clay sites too wet to work.

What is the soil like in Graham?

The USDA soil survey shows mostly Enon soils, well drained and a seasonal water table that can rise to about 2 feet.

Where does the debris from Graham jobs go?

For clean concrete, brick and block, the nearest permitted LCID landfill is Fryar Grading and Hauling LCID Landfill in McLeansville (Guilford County), roughly 17 miles from Graham, per the NC DEQ Solid Waste Section. Mixed demolition debris from Graham can go to Tri-Corners C&D Landfill in Liberty, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 11 miles off.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp