About our commercial demolition work in Graham
Graham grew about 12.5% between 2020 and 2024, faster than North Carolina as a whole.
For the full scope of the service, see our commercial demolition page. Here we focus on Graham: its housing, rules, ground and weather.
QUICK ANSWERS
- Commercial Demolition permit
- Required; we file it with the City of Graham or county
- Elevation
- About 653 ft
- Main soil
- Enon (well drained)
- County
- Alamance County
- Nearest large city
- Burlington, about 5 miles
What Graham’s homes tell us about commercial demolition
The typical home in Graham was built around 1984, older than the Alamance County median of 1987, according to American Community Survey estimates. 46% predate 1980, so older materials like asbestos siding, floor tile and lead paint are a real possibility in Graham, so we test before any teardown.
Graham’s homes are 64% detached houses, 20% apartments and condos, 5% mobile homes. That mix means commercial demolition in Graham ranges from single homes to larger residential buildings.
Graham at a glance for commercial demolition
U.S. Census Bureau figures show Graham going from 17,162 residents (2020) to 19,311 (2024), growth of 12.5%, ahead of the statewide 5.8%.
The Census Bureau building permits survey counts 517 new single-family homes authorized in Graham in 2024. Building at that pace means more lots being redone, including older structures that come down first.
Graham ground conditions and commercial demolition
The USDA soil survey maps Enon soils at 4 of nine points we checked across Graham. They are well drained and slow to absorb rain (hydrologic group C), on mapped slopes of 2–10%. The seasonal water table can rise to about 2 feet below the surface and the survey rates the ground “somewhat limited” for homes with basements.
Slow-draining ground sheds rain instead of soaking it up, so Graham sites get silt fence and positive drainage as soon as soil is exposed. With groundwater as close as 2 feet, open holes in Graham can take on water, so pumping is planned for wet months and fill goes in compacted layers.
Graham brownfields and what they mean for commercial demolition
7 properties in and around Graham are enrolled in the NC Brownfields Program, among them Town of Swepsonville, Woody Drive and Virginia Mills II.
Redeveloping a brownfield follows a Brownfields Agreement with NC DEQ, which can limit how soil is disturbed and how the land is used, so commercial demolition on these sites is planned around the agreement’s land-use restrictions.
Graham and nearby towns for commercial demolition
About 5 miles from Burlington, Graham is part of our Alamance County service area for commercial demolition.
According to Graham on Wikipedia, Graham is a long-standing community and stands about 653 feet up.
Graham residents can find ordinances and permit contacts on the City of Graham website and the Alamance County website.
Elsewhere in Alamance County, our commercial demolition pages cover Alamance, Glen Raven, Mebane, Elon and Saxapahaw.
Neighbors of Graham we serve: Swepsonville, Haw River, Burlington and Green Level.
Landmarks around Graham and commercial demolition
- Oneida Cotton Mills and Scott-Mebane Manufacturing Company Complex. Oneida Cotton Mills and Scott-Mebane Manufacturing Company Complex is a reminder of Graham’s working past; on older sites nearby, sorting brick, timber and metal for reuse is part of commercial demolition.
- Alamance Community College. Busy destinations like Alamance Community College bring traffic, so we plan hauling routes and times for commercial demolition to stay out of the way.
- Graham Historic District. Work close to Graham Historic District has to respect historic character. If a property sits inside a local historic district, commercial demolition may need a Certificate of Appropriateness before anything is removed.
Graham landfills and transfer stations for commercial demolition
Mixed demolition debris from Graham can go to Tri-Corners C&D Landfill in Liberty, the nearest active C&D landfill permitted by the NC DEQ Solid Waste Section, about 11 miles off. Clean concrete, brick and stumps have a closer option at Fryar Grading and Hauling LCID Landfill in McLeansville, an LCID landfill about 17 miles away.
Permits and rules for commercial demolition in Graham
Before commercial demolition starts in Graham, the City of Graham or the Alamance County inspections office must approve a demolition permit. We confirm whether the City of Graham or Alamance County handles your Graham address, then file the permit there. 46% of Graham’s homes predate 1980, so asbestos rules from the state Health Hazards Control Unit apply to many jobs here.
We follow the requirements of EPA: Asbestos NESHAP, OSHA: Demolition safety, NC DEQ: Solid Waste Section and OSHA: Cranes and derricks on every Graham job.
When to book commercial demolition in Graham
Sitting near 653 feet, Graham has Piedmont weather: steamy summers, pop-up storms and occasional winter ice. October and November is usually the best window for commercial demolition here, with steady temperatures and fewer afternoon storms; July and August are the hardest months.
The ice storm of December 2002 brought down trees and power lines across the central Piedmont, a reminder for property owners across Alamance County of how storms create demolition and clean-up work.
Graham commercial demolition pricing factors
What is specific to pricing commercial demolition in Graham:
- What the property is worth. Graham homes have a median value of about $201,000; that context shapes how much a commercial demolition project makes sense.
Commercial Demolition near Graham: map
Get a free commercial demolition quote in Graham
GRAHAM · ALAMANCE COUNTY
Need commercial demolition in Graham?
Send your Graham address for a free site visit and a fixed, itemized quote.