GRAHAM · ALAMANCE COUNTY · NC

Excavation in Graham, NC

Local excavation for Graham, a city of about 19,311: we visit, quote a fixed price and handle the work end to end.

Service areaGraham & Alamance County
PopulationAbout 19,311 (2024 est.)
EstimateFree site visit, fixed quote

FREE ESTIMATE

Free excavation quote in Graham

Free, fixed & itemized. No obligation.

Or call us +1 984-254-7755

Graham excavation, start to finish

Graham grew about 12.5% between 2020 and 2024, faster than North Carolina as a whole.

Our excavation page explains the work in general; below is what changes in Graham.

QUICK ANSWERS

Excavation permit
Needed for an acre or more; we check and file
Best months
October and November
New homes permitted, 2024
517
Population
About 19,311 (2024 est.)
Region
Piedmont

What Graham’s homes tell us about excavation

16% of Graham’s homes were built since 2010, and population moved up 12.5% from 2020 to 2024, which tells you how much new ground is being opened for excavation.

1984 is the median build year in Graham, older than the Alamance County median of 1987, per the American Community Survey, and 46% of homes predate 1980: reworking older Graham lots usually means correcting drainage that was never designed well.

Who needs excavation in Graham

From 17,162 people in 2020, Graham reached about 19,311 by mid-2024 according to the U.S. Census Bureau, growth of 12.5%, ahead of the statewide 5.8%.

Builders pulled permits for 517 new homes and apartments in Graham in 2024, 517 of them single-family, per the Census Bureau building permits survey. With that much new construction, Graham has a steady run of lots to clear and grade.

What Graham’s soil means for excavation

The USDA soil survey maps Enon soils at 4 of nine points we checked across Graham. They are well drained and slow to absorb rain (hydrologic group C), on mapped slopes of 2–10%. The seasonal water table can rise to about 2 feet below the surface and the survey rates the ground “somewhat limited” for homes with basements.

A water table near 2 feet means excavation in Graham is easiest in dry weather, with dewatering ready for a wet spell.

Brownfield sites and excavation in Graham

The NC Brownfields Program lists 7 sites in the Graham area, including Town of Swepsonville, Woody Drive and Virginia Mills II.

A Brownfields Agreement with NC DEQ can restrict digging, soil handling and future use; on these Graham sites, excavation starts with those restrictions.

Graham and nearby towns for excavation

About 5 miles from Burlington, Graham is part of our Alamance County service area for excavation.

At roughly 653 feet of elevation, Graham has its own character; see Graham on Wikipedia.

Check the City of Graham website and the Alamance County website for Graham’s current fees and permit desks.

Excavation is also available in Saxapahaw, Ossipee, Altamahaw, Alamance, Glen Raven and Mebane, all in Alamance County.

Close to Graham, the same excavation service covers Swepsonville, Haw River, Burlington and Green Level.

Landmarks around Graham and excavation

  • North Main Street Historic District. Work close to North Main Street Historic District has to respect historic character. If a property sits inside a local historic district, excavation may need a Certificate of Appropriateness before anything is removed.
  • Oneida Cotton Mills and Scott-Mebane Manufacturing Company Complex. Oneida Cotton Mills and Scott-Mebane Manufacturing Company Complex is a reminder of Graham’s working past; on older sites nearby, sorting brick, timber and metal for reuse is part of excavation.
  • Alamance Community College. Traffic around Alamance Community College shapes our schedule: trucks for excavation are timed around event days, peak hours and road closures nearby.

Permitted disposal sites for excavation near Graham

For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Fryar Grading and Hauling LCID Landfill in McLeansville (Guilford County), roughly 17 miles from Graham, per the NC DEQ Solid Waste Section. For Graham, the closest permitted construction and demolition landfill is Tri-Corners C&D Landfill in Liberty (Alamance County), roughly 11 miles away, per the NC DEQ Solid Waste Section.

Permits and rules for excavation in Graham

In Graham, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the City of Graham or the Alamance County inspections office may also want a grading permit. The City of Graham or Alamance County inspections office issues the permit, and we handle the application for your Graham property.

OSHA: Trenching and excavation, NC DEQ: Erosion and sediment control, EPA: Construction stormwater and OSHA: Heat exposure set the standards we work to in Graham.

Best time for excavation in Graham

Graham, around 653 feet up, gets hot, humid summers with afternoon thunderstorms and short, mild winters broken by the odd ice storm. October and November is usually the best window for excavation here, with mild weather and dry clay that holds equipment; July and August are the hardest months.

For Graham, the regional storm record includes this: the December 2002 ice storm coated the central Piedmont in ice, bringing down trees and power lines and leaving well over a million homes without power.

Graham excavation pricing factors

What is specific to pricing excavation in Graham:

  • Local property values. With a median home value near $201,000 in Graham, owners usually weigh the project against resale value, so we keep every line of the quote visible.

Map of our Graham excavation area

Book excavation in Graham

GRAHAM · ALAMANCE COUNTY

Need excavation in Graham?

Get a fixed excavation price for your Graham property after a free visit.

LIVE · NATIONAL WEATHER SERVICE

Excavation weather outlook for Graham this week

How the next seven days in Graham, Alamance County affect excavation, from the official National Weather Service forecast.

Loading the latest forecast for Graham…

READY TO CLEAR THE SITE?

Tell us about your excavation project in Graham.

Send a few project details and our team will get back to you with the next steps.

Sends your details to us on WhatsApp for a fast, free estimate. No obligation.

FAQ

Excavation in Graham: FAQs

Can’t find your answer? Call us or send your project details and a specialist will get back to you.

Ask a Specialist ↗
Who issues permits for excavation in Graham?

In Graham, disturbing an acre or more triggers an erosion plan under the NC DEQ erosion and sediment control program; the City of Graham or the Alamance County inspections office may also want a grading permit.

What month should I book excavation in Graham?

In Graham, at about 653 feet, October and November tends to work best because of mild weather and dry clay that holds equipment; July and August bring peak heat plus storms that leave clay sites too wet to work.

What is the soil like in Graham?

The USDA soil survey shows mostly Enon soils, well drained and a seasonal water table that can rise to about 2 feet.

Where does the debris from Graham jobs go?

For stumps, brush, soil and clean concrete, the nearest permitted LCID landfill is Fryar Grading and Hauling LCID Landfill in McLeansville (Guilford County), roughly 17 miles from Graham, per the NC DEQ Solid Waste Section. For Graham, the closest permitted construction and demolition landfill is Tri-Corners C&D Landfill in Liberty (Alamance County), roughly 11 miles away, per the NC DEQ Solid Waste Section.

Last updated · Reviewed by the Alpha Demolition project team

Call usWhatsApp